User manual ALPINE CDA-9884R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ EN R RDS MP3/WMA/AAC CD Receiver DE CDA-9884R FR ES · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc. Only the CD data in Session 1 can be played back. CD-DA&MP3 : CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. Select the type you prefer. SCROLL TYPE1: The characters scroll from right to left, a single character at a time. SCROLL TYPE2: Words are built up from left to right, a single character at a time. When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown. · Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. External Device Connecting to an External Amplifier POWER IC ON (Initial setting) / POWER IC OFF Scroll Setting (TEXT SCROLL) SCROLL AUTO / SCROLL MANU (Initial setting) This CD player can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3/WMA/AAC files, folder names and tags. SCROLL AUTO: The CD text information, the text information of folder and file names, and the tags are scrolled automatically. SCROLL MANU: The display is scrolled when a disc is loaded or when a track is changed, etc. When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POWER IC OFF : Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and cannot drive speakers. · The unit scrolls CD text names, folder names, file names or tag display. Amplifier Front left Front right Rear left Rear right Setting the Language Font LANGUAGE 1 (initial setting) / LANGUAGE 2 / LANGUAGE 3 Amplifier Three types of font can be selected. LANGUAGE 1: Normal font LANGUAGE 2: European font LANGUAGE 3: Russian font POWER IC ON : The speakers are driven by the built-in amplifier. Demonstration DEMO ON / DEMO OFF (Initial setting) Speakers SPEAKER RIGHT FRONT This unit has a demonstration feature for the display. · To quit Demo mode, set to DEMO OFF. Front right SPEAKER RIGHT REAR Rear right SPEAKER LEFT REAR Rear left SPEAKER LEFT FRONT Front left · No sound is produced by the system when the power output is set to OFF. 20-EN Setting Adaptive Steering Remote Control STEERING ON / STEERING OFF (Initial Setting) Setting the AUX+ SETUP Mode AUX+ ON / AUX+ OFF (Initial Setting) This unit is compatible with the adaptive steering remote control. This function allows operation by sending the steering remote control signal to the unit. To use the steering remote control, perform the following button operations after setting to ON and pressing /ENT. For details, consult your nearest Alpine dealer. An external device (such as a portable music player) can be connected to the iPod Direct connector of this unit. A portable music device and an iPod cannot be connected to the iPod Direct connector at the same time. AUX+ ON : Set to ON when a portable device is connected. If SOURCE/ is pressed and AUX+ is selected, the sound of the portable device is input to the unit. AUX+ OFF : Set to OFF when an iPod is connected. 1 Select the assigned function by turning the Rotary encoder. (e. g. DN You can change the AUX+ name display when AUX+ SETUP is set to ON. Press /ENT when AUX+ SETUP is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press /ENT. After that, turn the Rotary encoder to select the desired AUX+ name. FF SOURCE FF 2 Press the steering remote control button until the changed signal value of steering remote control appears in the left of the display. (e. g. Press SOURCE of the steering remote control button. ) The changed steering remote control signal appears in the left of the display. Setting the AUX+ Level (AUX IN GAIN) LOW (Initial setting ) / HIGH After setting to ON in "Setting the AUX+ SETUP Mode", this setting can be carried out. LOW: HIGH: Decreases the external input audio level. Increases the external input audio level. Setting the External Digital Input D-AUX ON / D-AUX OFF (Initial setting) DE SOURCE FF The changed signal value of steering remote control 3 Press /ENT to execute the setting value. When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5. 1-channel surround sound. You can change the Digital AUX name display when DIGITAL AUX is set to ON. Press /ENT when DIGITAL AUX is set to ON, and select DIGITAL AUX name by turning the Rotary encoder, then press /ENT. [. . . ] RED is right and WHITE is left. Front Output Input RCA Connectors It can be used as Front Output or Input RCA connectors. RED is right and WHITE is left. Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. When an Imprint BOX PXA-H100 (sold separately) is connected please use the Remote Turn-on lead of PXA-H100 to connect to your amplifier or signal processor. For details, refer to the Owner's Manual of PXA-H100. Subwoofer Output RCA Connectors RED is right and WHITE is left. System Switch When connecting a processor using Ai-NET, place the three switches in the EXT AP position. [. . . ]