User manual ALPINE CDA-9855

[. . . ] · ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. EN DE FR ES IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. Tel. : 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. [. . . ] If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. NOTE For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only. 3 When the RDS station signal received has become weak: AF seek mode, press and hold the TITLE button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. If there is no AF station, the display shows "SEEK END. " 12-EN Receiving RDS Regional (Local) Stations PTY (Programme Type) Tuning 1 2 1 2 Press and hold the INTLZ button for at least 2 seconds to activate the setting mode. Press the f UP button repeatedly to select "REG" Each press of the f UP button scrolls the modes as shown: FM-LV REG PTY31 AMBER DIM SUB DEMO AUX SCR MUTE BEEP NOTE If you press the DN g button the display scrolls in reverse sequence. Press the "F" button. The Programme Type of the station being currently received will be displayed for 5 seconds. · If there is no receivable PTY broadcast, "NO PTY" will be displayed for 5 seconds. · If no RDS station can be received, the display shows "NO PTY. " NOTE If no button is pressed within 5 seconds after pressing the PTY button, the PTY mode will be automatically cancelled. 3 4 Press the TUNE button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press and hold the INTLZ button for at least 2 seconds to deactivate the setting mode. 3 Press the DN g and f UP buttons within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. LIGHT M CLASSICS OTHER M Receiving Traffic Information 1 2 Press the T. INFO button to activate the Traffic Information mode. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternative frequencies to the AF list. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. 1 2 Press the "F" button. "PRIO-PTY" is displayed for 2 seconds and then the programme type for 3 seconds. The initial setting is "NEWS. " NOTE If no button is pressed within 5 seconds after pressing the P. PTY button, the PRIORITY PTY mode is automatically cancelled. 3 Press the DN g or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. The PRIORITY PTY function will activate. 3 Press the T. INFO button to deactivate the Traffic Information mode. PTY button. NOTE In the PRIORITY PTY function, unlike in the T. INFO function, the volume does not increase during operation. Displaying Radio Text Text messages from a radio station can be displayed. 1 2 3 4 5 Tune in a radio station that transmits text messages. The display shows "WAIT" for a few seconds, then starts scrolling the text message. Press the "F" button to return to the normal operation mode. The FUNC indicator disappears from the display. NOTES · If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds. If no buttons are pressed within 5 seconds, the FUNC indicator will turn off. 5 Press the "F" button to activate the normal mode. [. . . ] As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. <JAPANESE CAR> Front frame Remove the Detachable Front Panel (refer to page 4). Slide the mounting sleeve into the dashboard. 2 Metal Mounting Strap Screw Screws (M5 × 8) (Included) CDA-9855 Hex Nut (M5) Bolt Stud CDA-9855 Mounting Bracket When your vehicle has the Bracket, mount the long hex bolt onto the rear panel of the CDA7865R and put the Rubber Cap on the hex bolt. If your vehicle does not have the Mounting Support, reinforce the head unit with the metal mounting strap (not supplied). [. . . ]