User manual ALPINE CDA-7878R

[. . . ] R EN CDA-7878R FM/MW/LW/RDS CD Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e. g. , left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed a re-recording was attempted. · Use discs with MP3 files written in the format compliant with ISO 9660 level 1 or level 2. For details, see page 27. Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. NOTE The music sensor feature is functional in the play or pause mode. Fast Forward and Backward 1 Press and hold the g DN or f UP button to quickly move backward or forward until you reach the desired section of the track. On handling Compact Discs (CD/CD-R/ CD-RW) · Do not touch the surface. · Do not affix stickers or labels and do not write on the surface. Heat and humidity may damage the CD and you may not be able to play it again. Repeat Play 1 Press the REPEAT button to play back repeatedly the track being played. Press the REPEAT button again and select OFF to deactivate the repeat play. NOTES · If a CD Changer is connected and the RPT-ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. RPT- RPT- ALL (off) · In case a 6-disc CD changer is connected: In CD changer mode, press the "F" button to indicator and go to step 1 illuminate the within 5 seconds. · In case a 12-disc CD changer is connected: In changer mode, press the "F" button twice to indicator and go to step 1 illuminate the within 5 seconds. 21-EN CD Player Operation SOURCE BAND Select buttons (1 through 6) F M. I. X. SCAN M. I. X. After all the tracks on the disc have been played back once, the player will begin a new random sequence play until the M. I. X. button again to turn off the M. I. X. NOTES · If a CD Changer equipped with the ALL M. I. X. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. 1 Press the SCAN button to activate the Scan mode. To stop scanning, press the SCAN button and deactivate the Scan mode. NOTES · In case a 6-disc CD changer is connected: In CD changer mode, press the "F" button to illuminate indicator and go to step 1 within 5 the seconds. · In case a 12-disc CD changer is connected: In CD changer mode, press the "F" button twice to indicator and go to step 1 illuminate the within 5 seconds. M. I. X. (off) · In case a 6-disc CD changer is connected: In CD changer mode, press the "F" button to illuminate indicator and go to step 1 within 5 the seconds. · In case a 12-disc CD changer is connected: In CD changer mode, press the "F" button twice to indicator and go to step 1 illuminate the within 5 seconds. 22-EN Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to the CDA-7878R if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CDA-7878R, the CD Changer will be controllable from the CDA-7878R. Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by the CDA7878R. See the Multi-Changer Selection section on page 23 for selecting the CD Changers. NOTES · The controls on the CDA-7878R for CD Changer operation are operative only when a CD Changer is connected. · The "changer" indicator illuminates in the CD Changer mode. [. . . ] · Locate the unit and route the leads at least 10 cm away from the car harness. · Keep the battery power leads as far away from other leads as possible. · Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. · If you add an optional noise suppressor, connect it as far away from the unit as possible. [. . . ]