User manual ALPINE CDA-7852R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. [. . . ] The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically retune to a stronger transmitter that is broadcasting the same programme. Nota: Si presione el botón TITLE Remarque: Si vous appuyez sur la touche Note: When the TITLE button is pressed mientras esté visualizándose PS TITLE pendant qu'un PS (nom du while the PS (Programme Service (nombre del servicio del programa), el service de programme) est affiché, Name) is being displayed, the display visualizador mostrará la frecuencia de la fréquence de la station sera shows the station frequency. When the RDS station signal received has become weak: · AF seek mode, press and hold the AF button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. Press the F1 through F6 buttons in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press and hold the INTLZ button for at least 3 seconds to deactivate the setting mode. When a traffic information station is tuned in, the TP indicator lights up. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for 5 seconds, then returns to the previous display. When traffic information broadcast is over, the unit will automatically set in the standby mode. If the traffic information broadinformación sobre el tráfico des informations routières cast signal falls below a certain desciende por debajo de cierto tombe sous un certain level, the unit remains in the nivel, la unidad permanecerá en el niveau, l'appareil reste en receiving mode for 1 minute. If the volume level is changed información sobre el tráfico. Si cambia el volumen cuando esté while receiving traffic informapour la réception des recibiendo información sobre el prochaines informations tion, the changed volume level tráfico, la unidad memorizará el routières. Si vous changez le niveau du information is received next time, próxima vez que reciba volume pendant la réception the volume level will be autoinformación sobre el tráfico, la d'informations routières, ce matically adjusted to the level recibirá automáticamente al nivel niveau sera mémorisé et la memorized. The Programme Type of the station being currently received will be displayed for 5 seconds. " Note: If no button is pressed within 5 seconds after pressing the F1 button, the PTY mode will be automatically cancelled. Press the DN g and f UP buttons within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. [. . . ] If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. [. . . ]