User manual ALPINE CDA-7832R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. HALT USE IMMEDIATELY IF A PROBLEM APPEARS When problems appear, stop using the system immediately and contact the dealer from whom you purchased the equipment. Some problems which may warrant immediate attention include a lack of sound, noxious odors or smoke being emitted from the unit, or foreign objects dropped inside the unit. DO NOT OPERATE THE REMOTE CONTROL WHILE DRIVING Do not change settings while driving. [. . . ] When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. Note: If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Make sure that the Function indicator illuminates, and press the station preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Press and hold the INTLZ (Initialize) button for at least 3 seconds to activate the setting mode. When the RDS station signal received has become weak: AF seek mode, press and hold the RDS button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. Note: You can tune in an RDS station while you are listening to CD play. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. When the AF ON mode is selected, the unit automatically re-tunes in to a stronger station in the AF list. Make sure that the Function indicator illuminates, and press the preset location button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. In the REG ON mode, the unit automatically keeps receiving the related local RDS station. When a traffic information station is tuned in, the TP indicator lights up. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO. If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the unit produces an alarming sound. [. . . ] Looking at the back of the remote, grasp the battery holder at the bottom of the unit between your forefinger and thumb. slide the pointed object to the right (as indicated by the arrow) while at the same time pulling on the battery holder. Closing the case Push the battery holder back into the remote until a click is heard. Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. [. . . ]