User manual ALPINE 3DE-7887R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. LEM APPEARS El hacer caso omiso de las instruccio- When problems appear, stop using nes podría resultar en heridas graves the system immediately and contact o la muerte. Some problems which may warrant immediate attention include a lack of sound, noxious odors or smoke being emitted from the unit, or foreign objects dropped inside the unit. [. . . ] If the stereo FM signal becomes weak, the ST indicator disappears from the display and the unit automatically switches the mode from stereo to monaural to reduce the noise. When the signal becomes strong enough, the unit automatically switches back to the stereo mode. With the DX mode activated, both strong and weak stations will be tuned automatically. The DX indicator will turn off and the SEEK indicator will remain illuminated. Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds. Press the preset button into which you wish to store the station while the display is blinking (within 5 seconds). To use this procedure for other bands, simply select the band desired and follow steps 1 ­ 3 above. A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, MW and LW). Note: If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. The frequency on the display continues to change while the automatic memory is in process. The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. Note: If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Make sure that the Function indicator illuminates, and press the station preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Note: When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. When the RDS station signal received has become weak: AF seek mode, press and hold the AF button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. Make sure that the Function indicator is illuminating, then press the preset location button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. If the preset station and the stations in the AF list cannot be received: The unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears. [. . . ] Closing the cover Push the cover as illustrated until a click is heard. Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean soft cloth in a solution of mild neutral detergent before cleaning the disc. [. . . ]