User manual ALPATEC HU 60.1 ET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALPATEC HU 60.1 ET. We hope that this ALPATEC HU 60.1 ET user guide will be useful to you.


ALPATEC HU 60.1 ET : Download the complete user guide (135 Ko)

Manual abstract: user guide ALPATEC HU 60.1 ET

Detailed instructions for use are in the User's Guide.

[. . . ] Make sure that the voltage rating on the type plate corresponds to your main voltage. ⷠOnly use this appliance for domestic purposes and in the way indicated in these instructions. ⷠNever immerse the product in water or any other liquid for any reasons. [. . . ] As well as the change of the cord has to be done by a competent electrician. sPECIAL RECOMMENDATIONS : · When operating, please do not touch the water or parts is water flume. ⷠIn case of strange noise or smell, turn off and unplug the appliance. ⷠThe mist spraying from the humidifier should not be face to furniture. At first use let the appliance half an hour in the room before using so that the moisture sensor is completely efficient. ⷠThe best working environment for the humidifier is : temperature between 5°C and 40°C and moisture less than 80% HR. ⷠClean the water tank as well as the water flume before first use and after no use for long time. ⷠThis product is equipped with a descaling cartridge which has to be cleaned every two months or when white dust appears on the cartridge. Fill the tank with water (water temperature should be less than 40°C). Press M/A key (16), the appliance begins working and operating light indicator lights on. This key (15) allows you to choose moisture level · Press this key to choose moisture rate. If ambient moisture level is up to the moisture level preselected the appliance stops automatically working. This function is the same as "Moisture +" in opposite order : 90% ; 85% ; 80% . Its activation gives a well-being sensation, above all a cocooning atmosphere. Mode function will be alternatively changed from mode I (means constant and large mist), to mode II (means constant and middle mist), to mode III (means constant and small mist). Press timer key (11) to program the appliance on 2 hours, 4 hours, 8 hours or 12 hours. [. . . ] - Water is dirty or has been too much - Clean the water tank and add clean water. There is a strange noise - Water tank is not properly placed on the base. Instructions on environment protection Do not dispose of this product in the usual household garbage at the end of its life cycle ; hand it over a collection point for the recycling of electrical and electronic appliances. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPATEC HU 60.1 ET




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPATEC HU 60.1 ET will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.