User manual ALPATEC F 10 FC

[. . . ] ⷠNever immerse the product in water or any liquid for any reasons. ⷠDo introduce neither metallic objects, nor fingers inside the appliance in order to protect you from electrical shock. [. . . ] - Use the correct adaptor (13) or (14) (part 16 closed) inside the bottle and screw. - Remove the dust protection stopper (15) from adaptor and put the bottle with adaptor into the top cup from the water dispenser. 2- BEFORE USING Press the hot water and cold water pushbuttons together until water is flowing out. Switch on the appliance (switches on are on the back of the water dispenser (7) and/or (8). COLD WATER: - If you switch on the cooling water switch, cool light indicator lights on in orange. You can use the water dispenser but water will be not at < 15 ° C temperature. When cooling process will be finished, cool light indicator lights off. Press corresponding button cold water (5) to fill the glass with water. HOT WATER: - If you switch on the heating water switch, heating light indicator lights on in red. When temperature reaches 90°C, heating light indicator switches off and hot light indicator lights on in green. When temperature of hot water into the tank is not enough hot, hot light indicator will switch off and heating light indicator will switch on again (to restart heating process). Press corresponding button hot water (3) to fill the glass with water. Hot water use advice: As the heating process is extremely fast, we advice you to switch off the hot water switch (8) as soon as you finish to use it. Drain from water dispenser The remaining water should be drained from the water tank when the tank is to be cleaned or the water dispenser will not be used for a long time. [. . . ] If too many items are plugged into a single circuit, move some items to a different circuit. When you use the appliance for the first time, the water has an unpleasant taste. [. . . ]