User manual ALLEN & HEATH XONE BROCHURE

[. . . ] The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by ALLEN & HEATH. Any necessary adjustment, alteration or repair has been carried out by ALLEN & HEATH or its authorised agent. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase. Check with your ALLEN & HEATH agent for any additional warranty which may apply. This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC and the European Low Voltage Directives 73/23/EEC & 93/68/EEC. [. . . ] If you wish to cue the sampler effect before raising the source fader into the mix then set it pre-fade. Use the sampler return channel fader to bring up or remove the effect from the mix. You can use the Aux mix to cue your music when beat or cut mixing. Set all sends pre-fade and select the headphones monitor AUX switch to listen to the selected channels. This lets you listen to the effect of mixing the sources or matching the beat before you bring it into the house mix. 20 XONE:92 User Guide 3 PHONO/LINE switch. In the up position the switch selects the PHONO input, indicated by the green led. This input provides standard RIAA equalisation for high quality magnetic cartridge turntables. When pressed, LINE is selected, indicated by the led changing colour to red. Adjusts the input sensitivity of the channel to match the connected source to the console 0dB operating level. This provides a 20dB range with continuous adjustment for line level signals from ­10dBu to +10dBu. Stereo Channels 1 to 4 feature a unique four band equaliser providing infinite attenuation of high and low frequencies and -30dB attenuation of mid frequencies. This provides the DJ with effective equalisation to creatively alter and shape the sound during live performance rather than simply correct source problems. Press this switch to listen to the pre-fader channel signal in the headphones and to display its signal on the main meters. This does not affect the house mix or booth speakers and lets you audition the signal to cue a track before adding it to the mix. Cue is typically pre-EQ for music channels so that you do not lose your reference when beat mixing, regardless of the EQ effect, but can be selected to be post EQ by selecting the POST EQ switch in the master section. The CUE light-pipe illuminates so that you can see at a glance which channel is cued. Multiple cues can be selected by pressing two or more together, but make sure all cues are OFF first. 9 Channel meter. A 9 led meter bar always shows the presence of the pre-fader channel signal. Adjust the LEVEL control for normal music averaging 0dB with loudest moments reaching +6. A 60mm linear or rotary stereo VCA fader adjusts the signal level from off to the normal top position. This allows smooth fade ins and a visual indication of its contribution to the mix. The fader does not affect the pre-fade Aux sends. 21 Crossfader and VCF The crossfader is applied to the stereo music channels and lets you smoothly fade from one track into another using a single fader. It is also used as a creative performance tool to layer or interact between two sounds when cut or scratch mixing . [. . . ] XLR The professional standard 3 pin round connector used for microphone and other balanced connections. 33 Specifications 0dBu = 0. 775 Volts rms, +4dBu = 1. 23V rms Max output level MIX 1 MIX 2 AUX REC Internal headroom Freq response Distortion Crosstalk MIC EIN 22-22kHz Residual noise 0dBV = 1 Volt rms, -10dBV = 316mV rms Main meters Mic EQ Music EQ Peak reading 9 led -20 to +10 4-Band +/-15dB 100, 250, 2. 5k, 10kHz 4-Band +6dB / -30 (Mids) Infinity (12dB/Oct) LF/HF 250, 350, 2k, 2. 5K Ch fader 60mm stereo or rotary VCA +22dBu into 47 ohm +20dBu into 47 ohm +21dBu into 47 ohm +11dBV into 600 ohm +22dB 5Hz to 30kHz Channels +/-0. 5dB < 0. 003% THD+noise @1kHz > -93dB Inter-channel -126dB 150 ohm source MIX 1 MIX 2 AUX REC -99dBu -106dBu -90dBu -96dBu -88dBu (-90dB S/N) -90dBu (-88dB S/N) -88dBu (-86dB S/N) -96dBu Filters Panel PSU Mains In Power Lead AC mains Consumption Fuse rating Mix 1 & 2 faders Rotary Crossfader 45mm stereo VCA Replaceable Dual stereo VCF Analogue Steel Internal switch mode 3 pin IEC socket Country dependant 110 to 240V AC @ 47/63Hz 30W max 100-240V AC T500mAL BOOTH -106dBu Mix noise MIX 1 MIX 2 AUX REC Channel meters BOOTH -89dBu (-87dB S/N) Peak reading 9 led -20 to +10 Dimensions and Weights The console is fitted with rubber feet for desktop operation. Width Desktop Rack ears fitted (1) Rack ears fitted (2) Packed 320 mm (12. 6") 370 mm (14. 6") 482 mm (19") 470 mm (18. 5") Height 87. 6 mm (3. 5") 87. 6 mm (3. 5") 87. 6 mm (3. 5") 210 mm (8. 3") Depth 358 mm (14") 358 mm (14") 358 mm (14") 400 mm (15. 7") 8 kg (18 lbs) Weight 6 kg (13 lbs) Rack Ears Allow permanent fixing in a plinth or rack system. Fix in place using M6 screws or bolts. 11 348 rack ear fixings 8. 40 465. 2 rack ear fixings Rack ear fixings 117 87. 60 320 370 with rack ears fitted 482 with rack ears fitted 34 37. 30 101. 60 120 76. 20 101. 60 358. 00 XONE:92 User Guide XONE:92 BLOCK DIAGRAM CUE PRE-EQ POST-EQ PRE/POST EQ SELECT CUE MIX CUE POST DC CUE LOGIC DC AUX 1 MIX AUX 2 MIX FILTER 1 MIX FILTER 2 MIX XFADE X/Y DC CLEANFEED MIX LR MIX XFADE CURVE CROSSFADER Y FILTER 2 MIX MIDI OUT X FILTER 1 MIX XFADER - CC92 FADER FILTER 1 LFO DEPTH FILTER 2 LFO DEPTH TEMPO DATA MIDI TEMPO/DATA TEMPO ADJUST MIDI DATA - CC94 START/STOP START/STOP-REWIND STEREO INPUTS 1, 2, 3, 4 4 BAND EQ LEVEL PHONO LR RIAA MID2 METER + X Y ON X2 TAP RESONANCE LIMIT MAX RES LIMIT MAX RES ON X2 TAP RESONANCE HI DC MID1 OFF XFADE SELECT PHONO/LINE GN = PHONO RED = LINE + VCF2 TAP TEMPO MIDI CLOCK VCA LINE LR RIAA DISABLE +10dB GAIN DISABLE DC LO 2 OFF FILTER SELECT PRE AUX1 1 VCF to XFADER HPF BPF LPF VCF to XFADER HPF BPF VCF1 FREQ - CC12 VCF2 FREQ - CC13 MIDI OUTPUT CONFIGURE LPF VCF LINK 2-1 FREQ ON OFF VCF1 VCF2 XFADER MIDI CH ON 2=+ L PRE AUX2 FREQ CH16 CH15 FILTER DISABLE ON FILTER DISABLE CUE MIC/RTN INPUTS 1, 2 4 BAND EQ LEVEL MIC 2= + + GN = CH ON RED = PEAK -15dB DUCKING CLEANFEED MIX LR+CF MUSIC+MIC MIX 1 BAL 2=+ 0dBu MIX 1 OUT R + LR MIX FADER MOMENTARY CLEANFEED CONTROL MIC = CLEANFEED ENABLED RTN = CLEANFEED DISABLED MUSIC ONLY MIX MIX 1 L -2dBu HI MID1 MID2 MIC/RTN GN = MIC RED = RTN + DUCK OFF ON LATCHED CLEANFEED DISABLE RECORD OUT L -10dBV R MIX 2 OUT R STEREO RTN L/M R LO BOOTH MONO MUTE BOOTH -2dBu L PRE AUX1 BOOTH OUT R PRE AUX2 AUX 1 MIX -2dBu L LR SUM CUE ACTIVE ADD MIX AUX 1 OUT R + AUX 1 AUX 2 L HEADPHONES PHONES 1/4" L R AUX R AUX 2 MIX -2dBu + L PHONES 3. 5mm AUX 2 OUT R SPLIT CUE POST-EQ CUE MIX CUE LOGIC DC CUE PRG - SPLIT LR METER Connector Types XLR male and female connectors : TRS input and output connectors : RCA PHONO pin connectors DIN 5 pin male MIDI connectors Standard MIDI cable Type Balanced XLR female Unbalanced TRS jack RCA phono RIAA RCA phono Type Servo Balanced XLR male Impedance balanced TRS jack RCA phono Impedance balanced TRS jack Impedance balanced TRS jack ¼" and 3. 5mm, Tip = L Ring = R Impedance <2k ohm 6k ohm 47kohm/330pF >20k ohm Sensitivity -47 to ­10dBu -15 to +20dBu 3 to 100mV -10 to +20dBu Nominal Level 0dBu -2dBu -10dBV -2dBu -2dBu Pin 2 = hot (+) Pin 3 = cold (-) Pin 1 = GND Tip = hot (+) Ring = cold (-) Sleeve = GND Input Connections CH1, 2 IN (Mic) (Stereo Return) CH1, 2, 3, 4 (Phono) (Stereo Line) Output Connections MIX OUT 1 L, R (XLR) MIX OUT 2 L, R (jack) RECORD OUT AUX OUT 1 & 2 L, R BOOTH OUT HEADPHONES Impedance 47 ohm 47 ohm 600 ohm 47 ohm 47 ohm 30 to 600 ohm recommended XONE:92 User Guide 35 Installer Link Options CAUTION : The following service instructions are for use by qualified personnel only. [. . . ]