User manual ALFATEC CT2740R

[. . . ] Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] Children should be supervised to ensure that they do not play with the appliance. Replace the dust bag before it is full in order to maintain the best efficiency. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Do not pull on the cord to disconnect the plug from the electrical outlet. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter. When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning. 4. After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter with extension wand and handle(washed part should be dried in the shade throughly before assembling). Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter. CYCLONIC FILTER DUST BARREL CREVICE TOOL 5 CLEANING THE INLET FILTER(OPTION) 1 2 3 4 NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor. 7 - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. Nozzle, suction hose or tube is blocked. REMEDY Check cable, plug and socket. Leave to cool. Remove the object. Check that the cord is not Pull the cord out 2-3m and push twisted or wound unevenly. [. . . ] Nozzle, suction hose or tube is blocked. REMEDY Check cable, plug and socket. Leave to cool. Remove the object. Check that the cord is not Pull the cord out 2-3m and push twisted or wound unevenly. [. . . ]