User manual ALESIS MULTIMIX 8 LINE QUICK GUIDE

[. . . ] Registration helps you by ensuring that we can keep you up to date on any last-minute product issues. If you want, Alesis can also send you information on other products that might interest you. [. . . ] Once you have connected your sources, adjust their volume, pan position, and aux send levels. MAIN EXPAND IN and OUT jacks You can chain together as many MultiMix8Line mixers as you like by connecting the MAIN EXPAND OUT jack of mixer A into the MAIN EXPAND IN jack of mixer B. Continue connecting additional mixers in similar fashion (OUT B into IN C, OUT C into IN D, etc. Therefore, for any particular mixer, any signal sent from this jack will not be affected by the position of these controls. STEREO MONITOR OUTPUT This is an additional, unbalanced output that you can connect to a headphone amplifier, auxiliary recorder, or other device. This signal is tapped AFTER the MASTER volume knob: its level follows the MASTER volume setting. To connect the STEREO MONITOR OUTPUT to stereo equipment with separate Left and Right inputs, use a TRS-to-dual-TS 1/4" cable. A standard "Insert" cable, available from your audio dealer, is ideal for this application. Then, connect the two separate TS (mono) plugs to the target device, "Tip" signal Left and "Ring" signal Right. EFFECTS BUS LINK If you own two MultiMix8Line mixers, you can connect them so that they can share one external processor. use a TRS-to-dual-TS 1/4" cable such as a standard "Insert" cable. Connect the two separate TS (mono) plugs to the EFFECTS SEND of the first mixer, "Tip" signal Left and "Ring" signal Right. [. . . ] AC POWER CABLE The MultiMix8Line contains a built-in power supply with switchable international voltage. TEST CONDITIONS - Master level = max - Effects Return level = min - Signal fed into left/mono input of channel under test - For channel under test, gain = mid, pan = mid, effects = min - For all other channels, gain = min, pan = mid, effects = min LINE INPUTS THD+N: 0. [. . . ]