User manual ALESIS ADAT-M20
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALESIS ADAT-M20. We hope that this ALESIS ADAT-M20 user guide will be useful to you.
 |
You may also download the following manuals related to this product:
ALESIS ADAT-M20 V21 (208 ko)
ALESIS ADAT-M20 REFERENCE MANUAL (896 ko)
Manual abstract: user guide ALESIS ADAT-M20
Detailed instructions for use are in the User's Guide.
[. . . ] ALESIS M20 System Exclusive
Fourth Revision August 5, 1999
ALESIS PDAT SYSTEM EXCLUSIVE
The PDAT responds to all Alesis system exclusive ADAT commands, as well as MIDI Machine Control (MMC) commands. [. . . ] Note <#data bytes> must equal <24 Bit Address> must equal 0.
2.
Repeat the <#data bytes> <24 Bit Address> <data byte 1> . . <data byte N> sequence for programming of additional flash locations. Note that the <24 Bit Address> specifies the start of programming location for the specified <data byte>'s. Always complete the end of the transmission with the checksum sequence above. If <type> is 2, 3, 6, or 7 (data with interleaved checksum) then [data] is: <#data bytes> <24 Bit Address> <data byte 1> . . . .
PDAT System Exclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
<#data bytes> <24 Bit Address> <data byte 1> . . <data byte N> <checksum>
where: <#data bytes> is sent as a single byte greater than 0 but less than 128. The checksum is the sum of the previous <data byte> sequence mod 256. [. . . ] locate 99
17H -
Inject Tape F0H 00H 00H 0EH 16H <dev#> 17H F7H
18H -
Enter Deck Standby F0H 00H 00H 0EH 16H <dev#> 18H F7H
PDAT System Exclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Parameter Table Parameter Name VU Peak Hold Mode1 <param> <data> 01h 0. . 2 0 = No Peak Hold 1 = Momentary 2 = Continuous 02h 0 . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALESIS ADAT-M20
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALESIS ADAT-M20 will begin.