User manual ALESIS 7-51-0198-A

[. . . ] Make sure all items listed on the front of this guide are included in the box. Make sure all devices are turned off and all volumes are at "zero. [. . . ] 2TK TO MIX: Routes the 2TK input as well as the stereo return from the computer to the MAIN faders. 2TK TO CTRL: Routes the 2TK input as well as the stereo return from the computer to the HDPH /CTRL RM output. Follow these steps BEFORE you plug in your MultiMix FireWire mixer for the first time!If your computer has access to the Internet, point your browser to the Support > Downloads section of http://www. It's possible that updated drivers have been posted there since the time the software CD included with your MultiMix was printed. Using either drivers from the website or the software CD, connect your MultiMix FireWire to your computer and turn the MultiMix FireWire on. If you downloaded the drivers from the Internet, choose to install the drivers from a specific location when prompted, and point to the folder that contains the drivers. If you are using the drivers from the CD, choose to install the drivers automatically when prompted. For each of the several installations that occur, click "Continue Anyway" if Windows warns you that the drivers have not passed Microsoft Logo Certification. Continue installing the various sets of drivers until the you receive a message that "Your new hardware is installed and ready to use. " Do not cancel any of the installations, as they are all required for proper operation. Macintosh Mac driver installation is more straightforward, as only CoreAudio drivers are installed. [. . . ] Continuate l'istallazione dei vari set di drivers fino al momento in cui ricevete il messaggio "Your new hardware is installed and ready to use. Turn their volume down to zero Accendere il MultiMix FireWire Collegare il cavo del Firewire al MultiMix FireWire e al computer Accendere il computer [. . . ]