User manual ALCHEMIST TS-D-2

[. . . ] TS-D-2 24/192Khz Converter INSTRUCTION MANUAL TS-D-2 SPECIFICATIONS Data Types: 0dB Level: THD+n: Linearity: Signal/Noise Ratio: Frequency Response: Dynamic Range: Digital Filter: Output: Dimensions: DAC Type: 24 Bit, 192KHz, 64X OVERSAMPLING, 5-LAYER DAC Sampling Rates: Supports all sampling rates in range 32kHz - 96kHz All input data upsampled to 192KHz (Internally) 16, 18, 20 and 24 Bit SPDIF 2V rms >-92dB +/- 0. 3dB to 100dB >-100dB DC 21. 05KHz >100dB Delta SIGMA 5-LAYER 2. 00V@ 0dB 154 (W) x 45 (H) x 170 (D) (mm) ALCHEMIST, UNIT 1, FURZEWOOD HOUSE, CRANBOURNE INDUSTRIAL ESTATE CRANBOURNE ROAD, POTTER'S BAR, HERTS, EN6 3JN. [. . . ] CDR, MD or DAT For this output, the TSD2 is selected to incoming sampling rate at standard, internal selector permitted to output signal to 96KHz. Please contact your dealer for details. MAINS POWER CONNECTION The TSD2 comes with an external PSU which is fitted with the relevant mains plug type for the country of purchase. If in the event that this should blow replace only with the same type. Be sure that your system is switched off whilst connecting / disconnecting any leads. FRONT PANEL INDICATORS The front panel of the TSD2 bears two LED s and one button: Power. This BLUE LED will illuminate when the TSD2 is connected to its PSU and switched on. Input Selector. This GREEN LED will illuminate when Optical input is selected. SOURCE CONNECTION As the phono sockets on the TSD2 are gold, we recommend that, where possible, you use gold phono plugs on your interconnect leads, ensuring the best possible electrical contact. [. . . ] Keep the box for future transportation of your TSD2. Please note that, as with all hi-fi products, there are no user serviceable parts inside and you should refer any problems to your dealer. [. . . ]