User manual ALCHEMIST PRODUCT 8 CD

[. . . ] There is an external replaceable fuse on the rear of the unit: refer to specifications for fuse value. Be sure that your system is switched off whilst connecting / disconnecting any leads. PRODUCT 8 24Bit 192KHz Up-Sampling CD PLAYER POWER STOP DOWN PLAY UP OPEN/CLOSE CONTROLS FASCIA CONTROLS The controls on the fascia of the Product 8 CD Player are: Up, Down, Play, Stop, Open/Close and Power. [. . . ] You can review the whole sequence by pressing `check', each time you press will give you the next step in the sequence. In the meantime, any unwanted track can be deleted by pressing `cancel' when it is shown on the display. The whole program will be cancelled if `stop' is pressed in stop mode. RANDOM PLAY Press `shuffle' in stop mode, then press `play'. All of the tracks in the CD will be played randomly until all of them have been played. To cancel random play, press `shuffle' again in stop mode. INTRO PLAY Press `scan' and the Product 8 CD Player starts to play the first 10 second of each or remaining (if it is in play mode) track. Press `play' to play the tack which is playing. DESIGNED & MANUFACTURED IN HERTFORDSHIRE, ENGLAND DO NOT REMOVE ANY CHASSIS PANELS. NO USER SERVICEABLE PARTS INSIDE - REFER ALL SERVICING TO QUALIFIED PERSONNEL. CLASS 1 AUDIO PRODUCT Do not remove any panels for risk of electric shock! CLASS 1 LASER PRODUCT Peak Power Consumption: 12W MAINS FUSE: Ensure correct rating and type for voltage used!DO NOT OPEN ! This unit has been factory set to operate at the voltage marked below: RIGHT 110 - 120V, 60Hz Fuse Rating: T1A 220 - 240V, 50Hz Fuse Rating: T500mA BALANCED DIGITAL OUTPUT (AES/EBU) DIGITAL OUTPUT (SPDIF) LEFT RIGHT COAXIAL AUDIO OUTPUT (AES/EBU) BALANCED AUDIO OUTPUT (AES/EBU) SOURCE CONNECTIONS As with all connections ensure that the equipment is switched off before you attempt to connect any cables. The Product 8 CD Player offers several output methods, Coaxial Audio, Balanced Audio, Coaxial Digital and Balanced Digital. If you are using the audio outputs, ensure the `Right' output is connected to the `Right' input, and `Left' output to the `Left' input of your amplifier. If you need to upgrade to another Digital to Analogue Converter, it can be done via either one of the digital outputs. This will route the digital signal from the Product 8 CD Player directly into your DAC. [. . . ] Keep the box for any future transportation of your product. SPECIFICATIONS PRODUCT 8 CD PLAYER Audio Output (RCA): 2. 3V R. M. S. @0dB Digital Output (RCA): 500mV PEAK to PEAK SPDIF Digital Balanced Output: ­ 500mV PEAK to PEAK AES/EBU Power Consumption (Peak): 12 Watts External Fuse Rating: T1A@110-120V T500mA@220-240V Dimensions ( W x H x D): 470mm x 360mm x 105mm Weight (Packed): 12Kg CLASS 1 AUDIO PRODUCT CLASS 1 LASER PRODUCT CAUTION RISK OF ELECTRIC SHOCK! [. . . ]