User manual ALCATEL TEMPORIS 05

[. . . ] If you adjust the number to be dialed, the timer automatically resets itself. To dial the displayed number, pick up the handset before the timer reaches 0. Use the ▲(+) and ▼(-) buttons to display the number you want to dial. See steps 2 through 4 in the above section to complete the dialback sequence. [. . . ] This allows access to phone services that require a tone, such as banking and long-distance services. After you hang up the handset, the telephone automatically returns to pulse service. CALLER ID DISPLAY MESSAGES The following special messages indicate the status of a message or the unit: Battery power level is low. Please replace the batteries as soon as possible in order to maintain Caller ID operation. REDIALING A NUMBER If you want to call the last number you dialed again (up to 32 digits), use the redial feature. TROUBLESHOOTING TIPS NO DIAL TONE • Check all cabling to make sure that all connections are secure and not damaged. €¢ Check the hook switch: Does it fully extend when handset is lifted from cradle?CALLER ID (CID) FEATURES Visual message waiting indicator Current date Current time New calls Battery compartment MEMORY Before you store a telephone number in memory, make sure the dialing mode is correctly set for the type of service you have. The default dialing mode is tone (touch-tone), so if you have pulse (rotary) service, you must first change the dialing mode. € The following buttons can be stored into any memory location: 0-9. NO INFORMATION IS SHOWN AFTER THE PHONE RINGS • In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. €¢ Be sure to wait until the second ring before answering. pHONE DOES NOT RING • Make sure ringer switch is set to HI. ” OTHER PARTY CANNOT HEAR YOU • Make sure phone cord is securely plugged in. €¢ Make sure extension phones are on the hook at the same time you’re using the phone. It is normal for the volume to drop when additional extension phones are used at the same time. CANNOT DIAL OUT • Make sure the T/P dialing mode is set to the type of phone service you are subscribed to. Used equipment must be disposed of in compliance with current environmental protection regulations. You should return it to your reseller or dispose of it in an approved recycling centre. INSTALLING THE PHONE Choose the best location to install your telephone. [. . . ] Press the ▲(+) or ▼(-) arrow button until SET 2 CODE appears. The first digit flashes, indicating it is ready to accept the area code entry. Press ▲(+) or ▼(-) arrow button to choose 0-9 for the first digit. When the desired number is flashing, press the option button to advance to the next digit. [. . . ]