User manual ALCATEL PHONE ALERT FIRE

[. . . ] NOTE: IF PICKUP PHONE shows on the display, no other changes to the number can be made. The information sent from the telephone company is known to be a valid number to dial back (available only in limited areas). INSTALLING THE BATTERIES SETTING THE LCD CONTRAST store button delete button redial button mem button flash button arrow buttons This adjustment allows you to adjust the contrast and viewing angle of the display. Press the ▲(+) or ▼(-) arrow button until SET 5 LCD appears. [. . . ] Press either ▲(+) or ▼(-) button to scroll among the 5 menu screens, which are: SET 1 DATE SET 2 CODE (default is ----) SET 3 T-P SET 4 FLASH (default is 600) SET 5 LCD (default is 3) NOTE: You may press delete button anytime to exit the Set Up menu. If no buttons are pressed within 20 seconds, the phone automatically exists the Set Up menu and returns to the NO CALLS summary screen. TELEPHONE BASICS ADJUSTING THE VOLUME You may control the listening level with the VOLUME switch, which has three levels (HI, MI, LO). USING TEMPORARY TONE DIALING If you have pulse service, you can temporarily change from pulse to tone service. After dialing the telephone number, press and release the *TONE button on the telephone. This allows access to phone services that require a tone, such as banking and long-distance services. After you hang up the handset, the telephone automatically returns to pulse service. CALLER ID DISPLAY MESSAGES The following special messages indicate the status of a message or the unit: Battery power level is low. Please replace the batteries as soon as possible in order to maintain Caller ID operation. REDIALING A NUMBER If you want to call the last number you dialed again (up to 32 digits), use the redial feature. TROUBLESHOOTING TIPS NO DIAL TONE • Check all cabling to make sure that all connections are secure and not damaged. INTRODUCTION Your Caller ID phone stores and displays specific information, provided by your local telephone company, to subscribers of Caller ID or similar caller identification services. Your Caller ID phone enables you to: Identify callers before you answer the phone. €¢ To get the most from your new phone, we suggest that you take a few minutes right now to read through this user’s guide. Caller ID number SUMMARY SCREEN The Summary Screen shows the current time, current date, and number of new calls to be reviewed. Within 60 seconds of receiving a new call, the Summary Screen displays. BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: CONNECTING THE TELEPHONE LINE 1. NOTE: The unit is properly installed if you pick up the handset and hear the dial tone. RECEIVING AND STORING CID RECORDS This unit receives and displays CID information transmitted by your local phone company. When the memory is full, a new call record automatically replaces the oldest call record in memory. NEW shows in the display for call records received which have not been reviewed. Pick up the handset and press the mem button or press the dial button. [. . . ] Feed the line cord through the groove and wrap the cord around the track on the bottom of the base. Feed the line cord through the groove on the opposite side of the track, and plug the end into the modular telephone jack. Slip the mounting holes (on the bottom of the base) over the wall plate posts and firmly slide the unit down into place. Press either ▲(+) or ▼(-) to display the number you want to copy. [. . . ]