User manual ALCATEL-LUCENT SPEEDTOUCH 605 1

[. . . ] SpeedTouchTM605 Business DSL Routers CLI Reference Guide Release R5. 3. 1 SpeedTouchTM 605 CLI Reference Guide R5. 3. 1 Copyright Copyright ©1999-2005 THOMSON. Passing on, and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. [. . . ] Display/modify the HyperText Transfer Protocol (HTTP) Intercept fixed proxy configuration. Display/modify HTTPI recycling settings Display/clear DSD framework and module statistics Display/modify the HTTP Intercept configuration. Empty the internal cache Display the cache statistics Configure web filter Display the web filter license state Add a category to a group Create a category or group Delete a category or a group Delete all categories and groups List all categories and groups Remove a category from a group 185 186 187 188 189 190 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 E-DOC-CTC-20050531-0059 v1. 0 183 DSD Commands dsd webfilter professional config dsd webfilter professional level add dsd webfilter professional level delete dsd webfilter professional level flush dsd webfilter professional level list dsd webfilter professional level modify dsd webfilter professional level set dsd webfilter professional rule clear dsd webfilter professional rule list dsd webfilter professional modify dsd webfilter server add dsd webfilter server config dsd webfilter server delete dsd webfilter server flush dsd webfilter server list dsd webfilter server modify dsd webfilter standard category add dsd webfilter standard category create dsd webfilter standard category delete dsd webfilter standard category flush dsd webfilter standard category list dsd webfilter standard category remove dsd webfilter standard level add dsd webfilter standard level delete dsd webfilter standard level flush dsd webfilter standard level list dsd webfilter standard level modify dsd webfilter standard level set dsd webfilter standard rule clear dsd webfilter standard rule list dsd webfilter standard rule modify Display/ modify a webfilter. Add a new web filtering level Delete a web filtering level Delete all levels. Modify a web filtering level Set the current web filtering level Reset the level to a default rule List all the rules Modify a rule Add a web filter server Configure web filter server Delete a web filter server Flush the server list List all web filter servers Modify a web filter server Add a category to a group Create a category or group Delete a category or group Delete all the levels Display the levels Remove a category from a group Add a new web filtering level Delete a web filtering level Delete all levels Display the levels Modify a web filtering level Set current web filtering level Reset level to default rule List all rules. Modify a rule 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 184 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands dsd config Display/modify the Differentiated Service Delivery (DSD) framework configuration. SYNTAX: dsd config where: state Enable or disable the DSD framework. REQUIRED [state = <{disabled | enabled}>] EXAMPLE: =>dsd config State : enabled => E-DOC-CTC-20050531-0059 v1. 0 185 DSD Commands dsd debug connection list Display the internal connection pool usage. SYNTAX: dsd debug connection list where: expand Enable or disable the expanded listing. optional [expand = <{disabled|enabled}>] 186 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands dsd debug proxy Display/modify the HyperText Transfer Protocol (HTTP) Intercept fixed proxy configuration. SYNTAX: dsd debug proxy [state = <{disabled | enabled}>] [dest = <ip-address>] [port = <{supported TCP/UDP port} or number>] where: state dest port Enable or disable fixed proxy redirecting. Select one of the supported Transmission Control Protocol (TCP)/UDP port names (see " Supported TCP/UDP Port Names" on page 647) or, alternatively, specify the port number. OPTIONAL OPTIONAL OPTIONAL EXAMPLE: =>dsd debug proxy State : off Dest. IP : 0. 0. 0. 0 Port :0 => E-DOC-CTC-20050531-0059 v1. 0 187 DSD Commands dsd debug recycling Display/modify HTTPI recycling settings SYNTAX: dsd debug recycling state = <disabled>|<enabled> interval = <number> httpidle = <number> otheridle = <number> where: state interval httpidle otheridle Enable/disable stream recycling Time between successive activity checks Minimal idle count for recycling (filtered) http streams Minimal idle count for recycling other streams OPTIONAL OPTIONAL OPTIONAL OPTIONAL 188 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands dsd debug stats Display/clear DSD framework and module statistics SYNTAX: dsd debug stats name = <{intercept|urlfilter|recycling|syslog|all} clear = <{no|yes}> where: name clear Specify the name of a module Clear the specified statistics REQUIRED REQUIRED E-DOC-CTC-20050531-0059 v1. 0 189 DSD Commands dsd intercept config Display/modify the HTTP Intercept configuration. SYNTAX: dsd intercept config [WDSpoofedIP = <ip-address>] [servertimeout = <number>] [servererrorurl = <string>] [categoryerrorurl = <string>] [monitorintercepturl = <string>] [urlblockedurl = <string>] [imageredirect = <{disabled | enabled}>] [imageredirecturl = <string>] [alwaysuseip = <{disabled | enabled}>] where: WDSpoofedIP servertimeout The IP address indicating unavailable WAN connection. The destination URL when the connection to the category server failed. The destination URL when the request is intercepted by the monitor thread. Always use IP address when redirecting to a local page (enabled) or not (disabled). OPTIONAL OPTIONAL servererrorurl categoryerrorurl monitorintercepturl urlblockedurl imageredirect imageredirecturl alwaysuseip OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL EXAMPLE: =>dsd intercept config WAN down spoofed IP : Servertimeout : Connection failure : Category server error : Monitor intercept : Unauthorized request : Image redirecting : Image redirect url : Always use IP : => 198. 18. 1. 1 10 sec /cgi/b/ic/connect/ /cgi/b/ic/connect/ /cgi/b/ic/connect/ /cgi/b/sfltr/blocked/ enabled /images/spacer. gif enabled 190 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands RELATED COMMANDS: dsd intercept stats Display the HTTP Intercept statistics. E-DOC-CTC-20050531-0059 v1. 0 191 DSD Commands dsd intercept stats Display the HTTP Intercept statistics. SYNTAX: dsd intercept stats EXAMPLE: =>dsd intercept stats Total requests Unauthorized requests Request errors => :2 :0 :2 RELATED COMMANDS: dsd intercept config Display/modify the HTTP Intercept configuration. 192 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands dsd syslog config Display/modify the HTTP Intercept logging configuration. SYNTAX: dsd syslog config [syslog = <{none | unauthorized | errors | intercepted | all}>] where: syslog Define the type of events to log. unauthorized: only the HTTP requests that are blocked because of a LocalRule, BlockCategory, BlockIPAddress or BlockObscure event, are logged. errors: only the HTTP requests that are blocked because of Server errors, Category errors, Monitor intercept, loop detection, bad requests or redirects by local policy rules. intercepted: only the HTTP requests that are blocked because of URLBlocked, Server errors, Category errors, Monitor intercept, loop detection, bad requests or redirects by local policy rules. OPTIONAL EXAMPLE: =>dsd syslog config syslog : errors => RELATED COMMANDS: dsd syslog list Display the HTTP Intercept log file. E-DOC-CTC-20050531-0059 v1. 0 193 DSD Commands dsd syslog list Display the HTTP Intercept log file. SYNTAX: dsd syslog list EXAMPLE: =>dsd syslog list <86> SysUpTime: 00:22:37 [HTTPI] src=10. 0. 0. 1 src_port=1965 dst=141. 11. 196. 35 dst_port=80 event=Se rverConnect dst_name=aWebsite. com/icons/Button_Document. gif <86> SysUpTime: 00:22:59 [HTTPI] src=10. 0. 0. 1 src_port=1968 dst=141. 11. 234. 60 dst_port=80 event=Se rverConnect dst_name=anotherWebsite. com/rawgen. asp => RELATED COMMANDS: dsd syslog config Display/modify the HTTP Intercept logging configuration. 194 E-DOC-CTC-20050531-0059 v1. 0 DSD Commands dsd urlfilter config Display/modify the URL filtering configuration. SYNTAX: dsd urlfilter config [state = <{disabled | enabled}>] [blockproxy = <{disabled | enabled}>] [blockipaddress = <{disabled | enabled}>] [blockobscuredip = <{disabled | enabled}>] [defaultaction = <{block | accept}>] where: state blockproxy blockipaddress blockobscuredip Enable or disable URL filtering. Enable or disable blocking of HTTP requests if host name is IP address. Enable or disable blocking of HTTP requests if host name is believed to be an IP address. OPTIONAL OPTIONAL OPTIONAL OPTIONAL defaultaction OPTIONAL EXAMPLE: =>dsd urlfilter config Filter state Block proxy traffic Block IP addr Block obscured IP addr Default action => : : : : : enabled disabled disabled disabled accept E-DOC-CTC-20050531-0059 v1. 0 195 DSD Commands dsd urlfilter rule add Add a rule. SYNTAX: dsd urlfilter rule add url = <string> action = <{block | accept | redirect}> redirect = <string> where: url action Definition of the URL filter. REQUIRED REQUIRED REQUIRED Note This parameter is only required when the action is redirect. EXAMPLE: =>dsd urlfilter rule add url=www. speedtouch. com action=redirect redirect=www. speedtouch. be =>dsd urlfilter rule list Index Action Url Redirect ----- --------------0 redirect www. speedtouch. com www. speedtouch. be Rule list statistics : 1 present, 128 total (0. 0% used) => RELATED COMMANDS: dsd urlfilter rule delete dsd urlfilter rule list Delete a rule. [. . . ] password = **** role = Administrator [hash2] = [descr] = [defuser] = [defremadmin] = :user add name=JohnDoe password=_CYP_x9O/lhxuRyMME role=Administrator {Administrator}=>user list User Flags Role -------- ---Administrator U Administrator tech R TechnicalSupport JohnDoe Administrator {Administrator}=> DESCRIPTION: U: indicates the default user. R: indicates the default remote administrator. RELATED COMMANDS: user delete user list Delete a user. Display the users. E-DOC-CTC-20050531-0059 v1. 0 623 User Commands user config Modify a user. You can only modify a user whose privileges are the same or lower than your own privileges. SYNTAX: user config name = <string> [password = <password>] [role = <string>] [descr = <quoted string>] [defuser = <{disabled | enabled}>] [defremadmin = <{disabled | enabled}>] where: name password The user name. [. . . ]