User manual AKG K 206 AFC

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] When scrapping the equipment, separate the case, circuit boards, and cables, and dispose of all components in accordance with local waste disposal rules. To dispose of the packaging, make sure to use a collection/recycling system provided for that purpose and observe local legislation relating to waste disposal and recycling. POWER ON: this green LED is lit to indicate power to the transmitter is on. CHARGE: this red LED is lit to indicate the batteries inside the headphones are being charged. Your headphone system package contains the following components: K 206 AFC headphones for 864 MHz (item no. Connecting cable with stereo mini jack plug and L/R RCA plugs for connecting the transmitter to your audio source Stereo mini jack to 1/4" adapter jack Before connecting the transmitter to your audio source, switch the audio source OFF. 5, plug the red RCA connector (right channel) on the supplied connecting cable into the red AUDIO IN R socket (7) and the white RCA connector (left channel) into the white AUDIO IN L socket (7) on the transmitter rear panel. If the headphones output on your equipment is a 1/4" jack, plug the supplied mini jack to 1/4" adapter jack onto the connecting cable. Before connecting the transmitter to your audio source, switch the audio source OFF. 7, plug the red RCA connector (right channel) on the supplied connecting cable into the red LINE OUT R or REC OUT R socket and the white RCA connector (left channel) into the white LINE OUT L or REC OUT L socket on your audio source. 3 Charging the Batteries In order to ensure the longest possible service life for the rechargeable batteries, we deliver them uncharged. Therefore, you will need to charge the supplied batteries before first operating your headphones system. 4), never try to charge the batteries using the transmitter's charging feature. Make sure to align the batteries with the polarity marks inside the battery compartments. [. . . ] Press AUTOTUNING switch on headphones or use FREQ selector to select different carrier frequency and press AUTOTUNING on headphones. Use FREQ selector on transmitter to select different carrier frequency and press AUTOTUNING switch on headphones. [. . . ]