User manual AKG K 1000

[. . . ] Headphones are connected to transmitter via charging cable and switched ON so batteries are not being charged. Batteries are inserted the wrong way and are therefore not being charged. Headphones are connected to transmitter via charging cable and are being charged. Headphones are connected to transmitter via charging cable and are being charged. [. . . ] Plug the red RCA connector (right channel) on the supplied connecting cable into the red INPUT R jack (8) and the white RCA connector (left channel) into the white INPUT L jack (8) on the transmitter rear panel. If the headphones output on your equipment is a 1/4" jack, plug the supplied mini jack to 1/4" adapter jack onto the connecting cable. Before connecting the transmitter to your audio source, switch the audio source OFF. Plug the red RCA connector (right channel) on the supplied connecting cable into the red LINE OUT R or REC OUT R socket and the white RCA connector (left channel) into the white LINE OUT L or REC OUT L socket on your audio source. Note that the transmitter will automatically switch OFF about 4 minutes after switching OFF your audio source (stereo, VCR, TV set, etc. 1 Charging the Batteries In order to ensure the longest possible service life for the rechargeable batteries, we deliinside the Headphones ver them uncharged. Therefore, charge the supplied batteries before first operating your headphones system. The supplied batteries have been inserted into the headphones for your convenience. WARNING: If you operate the headphones on dry batteries (see section 4. 3), never try to charge the batteries using the transmitter's charging feature. If the green status LED (2) is glowing, switch the headphones off with the POWER switch (1). Listening over headphones at high volume levels, particularly over extended periods of time, may damage your hearing. For physical reasons that have nothing to do with the quality of the product, extremely strong interference sources may affect reception. In order to maintain interference-free listening pleasure, do not operate your K 1000 in the close vicinity of radio equipment, cellular telephones, or directly above TV or computer monitor picture tubes. The supplied connecting cable is long enough to allow the transmitter to be placed at a safe distance from interference sources. Interference caused by other users of the 914 or 864 MHz LPD band are beyond AKG's control. We recommend to clean the transmitter and headphones surfaces using a soft cloth moistened with water. Connect charging cable or push connectors all the way into the charging jacks. Use A-B-C switch to select different carrier frequency and readjust TUNING control on headphones. AKG warrants AKG products against evident defects in material and workmanship for a period of one year from the date of original purchase for use. This Warranty does not cover damage resulting from misuse or abuse, or lack of reasonable care, or inadequate repairs performed by unauthorized service centers. Performance of repairs or replacements under this Warranty is subject to submission of the sales slip. [. . . ] Performance of repairs or replacements under this Warranty is subject to submission of the sales slip. Shipment of defective items for repair under this Warranty will be at the customer's own risk and expense. Limited Warranty (valid in the United States only) AKG warrants AKG products against evident defects in material and workmanship for a period of one year and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor. Important: This Warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any but the specified receptacles. [. . . ]