User manual AKG D 40

[. . . ] Luftfeuchtigkeit bei +20°C: 95% Steckerart: 3-poliger Standard XLR-Stecker Steckerbeschaltung: Stift 1: Masse Stift 2: Tonader (inphase) Stift 3: Tonader Gehäusematerial: Metall Oberfläche: dark stage blue Abmessungen: L: 100 mm; max. Please make sure that the piece of equipment your microphone will be connected to fulfills the safety regulations in force in your country and is fitted with a ground lead. [. . . ] The best way to get the "right" sound is to experiment with microphone placement. Please note that moving the microphone closer to the instrument will boost the bass range. If you consider the noise produced by the keys as characteristic of the saxophone sound or the song, point the microphone at the middle of the instrument. However, if you want no key noise, direct the microphone toward the front outer rim of the bell. If you aim the microphone into the bell, you will get a high amount of wind noise. On stage, you may have to move as close as 2 inches to the microphone in order to avoid getting feedback or spillover from other instruments. In order to prevent overload distortion aim, the microphone at the lower rim of the bell. On stage, you may have to move as close as 2 inches to the microphone in order to avoid getting feedback or spillover from other instruments. Place the microphone about 2 to 6 inches in front of the loudspeaker diaphragm and aim the microphone at the center of the diaphragm. To prevent the top head from ringing excessively, tape a strip of felt or a piece of tissue paper to the skin in an offcenter position. Screw the supplied H 440 bracket to the stand adapter on the microphone using the captive knurled-head screw on the H 440 bracket. Place the microphone as close as possible to the drums, aiming it between the two drums. [. . . ] 147 dB SPL / 156 dB SPL 600 ohmios 2000 ohmios temperatura: -10°C a +60°C humedad del aire a +20°C: 95% Conector: conector estándar XLR de 3 polos Modo de conexión: clavija 1 = tierra clavija 2 = audio (en fase) clavija 3 = audio Material de la caja: metal Superficie: dark stage blue Dimensiones: largo: 100 mm; diámetro máx. 000 Hz Sensibilidade a 1000 Hz: 2, 5 mV/Pa (-52 dBV em relação a 1V/Pa) Nível de ruido equivalente: 18 dB(A) (DIN 45412) Pressão acústica limite para coeficiente de distorção não linear de 1% / 3%: 147 dB SPL / 156 dB SPL Impedância elétrica a 1000 Hz: 600 ohms Impedância de carga recomendada: 2000 ohms Condições climáticas permitidas: faixa de temperatura: -10º C a + 50º C umidade relativa com 20°C: 95% Tipo do conector: XLR standard de 3 pinos Esquema do conector: pino 1: massa pino 2: áudio (em fase) pino 3: áudio Material da carcaça: metal Acabamento: dark stage blue Dimensões: comprimento: 100 mm, diâmetro máx. [. . . ]