User manual AKG C 519 M

[. . . ] Please make sure that the piece of equipment your microphone will be connected to fulfills the safety regulations in force in your country and is fitted with a ground lead. C 519 ML: B 29 L battery power supply 1 Cardioid microphone for high gain before feedback. [. . . ] Use the supplied connecting cable to connect the output socket (4) on the gooseneck to one of the two mini XLR sockets on the B 29 L or the mini XLR socket on the connecting cable of the MPA V L. To disconnect the cable, press the unlocking button on the mini XLR connector (1) and pull the connector (1) out of the socket. MPA V L: Connect the MPA V L to a balanced XLR microphone input with phantom power and switch the phantom power on. You can attach the bodypack transmitter to your belt or to the instrument. Reinsert the ends of the fixing clip (1) into the openings in the adapter. â· If you get too much wind noise, slip the supplied external windscreen on the microphone. â· If you use a mute, be sure to position the microphone outside of the bell to clear the mute. â· For subtone playing, you might like to align the microphone with the middle of the bell. The clarinet radiates low frequencies through the keys and high frequencies through the bell only. Clamp the microphone on the bell so that the microphone will look at the outside of the clarinet. [. . . ] Phantom power supply: connect to power outlet or insert battery (batteries). To order a free copy of the Declaration of Conformity, visit http://www. [. . . ]