User manual AKAI LCT3226

[. . . ] Safety Guidelines Caution: Always use a power cable is properly grounded. Please use the AC cords listed below for each area: USA . . . . . . . . . . . . . . . . . . . . . CSA/cUL FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Note: Press CH +/- on the remote control can CH+/CHturn on TV set from last preview mode. For protecting your LCD TV product, the , ENTER interval time between turn on the LCD TV product and shut down it should be kept at least one minute. 6. 2 Selection of Input Mode ADD/EARSE FAVORITE - Press SOURCE / on the remote control or on the LCD TV control panel to select the signal source you desired. When no input from the selected signal source, "Main no signal" will appear, press SOURCE / on the remote control or on the control panel again to search the next source. Note: The LCD-TV will automatically turn itself off after approximately 15 minutes if no signal input. A "No signal and going to power down" wording will appear. You can press "" or "" button to selected, press "ENTER" to confirm. If select "Cancel" or no operation, the LCD-TV will automatically turn off after 1 minutes, if select "OK", it will turn off immediately. 6. 3 Other Function - FAVORITE: Press FAVORITE button repeatedly, you will cycle through Favorite Channel. ADD/ERASE: Press this button to add/erase current channel to/from the list of favorite directly. Add current channel into the list of favorite if a heart shape mark displaying on the left top of screen. Erase current channel from the list of favorite if a broken heart shape mark displaying. (Continued on next page) 18 Note: - If you don't want do add/erase this channel to/from the list of favorite, press this button again. - For addition, it will be put at last of the favorite list and the first channel in favorite list will overflow in case of the list is full. SLEEP: Press repeadtedly until it displays the time in minutes (5 Min, 10 Min, 15 Min, 30 Min, 60Min, 90 Min, 120 Min and OFF) that you want the TV to remain on before shutting off. A "Turn off by Timer setting" wording will appear, you can press or button to selected, press "ENTER" to confirm. If select "OK" , the LCD-TV will turn off immediately, if select "Cancel", it will cancel sleep time. RECALL : Press to switch between present channel and previous channel. Note: If the previous channel is a locked channel, it display blue background and lock information. FREEZE: Press it to hold the current video and press again to cancel and return to normal viewing. FREEZE SLEEP DISPLAY ZOOM : Press to zoom the image. DISPLAY: Press once to display the information as following, and disappear after 3 second; When in TV mode 68 Mono Stereo Sap FREEZE - RECALL ZOOM When in VGA mode VGA 640 x 480 60Hz (Continued on next page) 19 USING THE POP DOUBLE-WINDOW FEATURE OSD OPTION ADJUSTMENT 6. 4 Using the POP double-window feature The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR. Press PIP for selecting the different POP modes, such as following; Normal Picture SOURCE PIP Basic PIP Mode LR POP Mode Use / to select the window and active it with a red-colored frame. To change the next programmed channels, press number buttons (0~9) or CH+/CH-. Note: a. If the V-CHIP feature is active and you try to watch a TV program that exceeds your set rating limits, the program will be blocked. For active window, you can change channels, adjust volume, select input source ect. . After power off, the active window will be keep the setting when you power on next time. It is must to have second video source connected for basic PIP and L/R POP modes. (Continued on next page) 20 To display a picture from an external source in the POP window: 1. [. . . ] 2 Cleaning of Housing and Remote Control: - Use a soft cotton cloth for cleaning. - If the housing or remote control are seriously contaminated, use a soft cloth moistened with diluted neutral clean the Display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. 3 Cleaning of Screen: - Use a soft cotton cloth to clean the screen gently. [. . . ]