User manual AKAI DVR3500SS

[. . . ] Operator's manual 3-DVD/CD HOME THEATER SYSTEM DV-R3500SS Operator's manual 1~43 Important Safety Instructions WARNING RISK OF ELECTIC SHOCK DO NOT OPEN The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. AVOID EXPOSURE TO BEAM This product contains a low power laser device. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 PRODUCTO LASER CLASSE 1 This symbol means that the unit complies with European safety and electrical interference directives. The symbol for Class II (Double lnsulation) On Placement · Do not use the Unit in places which are extremely hot, cold, dusty, or humid. [. . . ] Notes : · If only one audio format is recorded, the number does not change. · About two seconds later, playback continues in the new audio format. E - 21 (Continued on next page) Playing a Disc Subtitle selection 1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example below. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. Notes : · If only one language is recorded, the language does not change. · About two seconds later, playback continues with the new subtitle you selected. · The number of languages recorded differs depending on the disc. · If no button is pressed within a few seconds, playback continues without changing the current subtitle. · This function can only be used for discs on which subtitles have been recorded in multiple languages. · On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the main menu. E - 22 Basic playback Special Functions DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE. · While the disc is playing, press the DISPLAY button to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Remaining time: Remaining time of the title which is currently playing. Elapsed Time Remaining Time · Press the DISPLAY button twice to display the screen shown as below. · Press the ANGLE, AUDIO and SUBTITLE button to change the selected item. Chapter Title Time Audio setting Subtitle setting Angle setting Title skip · The number of the title currently playing and total titles of disc. · Press the GOTO button to set your desired title, then press the ENTER button to confirm. Chapter skip · The number of the chapter currently playing and total chapters of the currently played title. · Press the GOTO button to set your desired chapter, then press the ENTER button to confirm. Time skip · Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of the currently playing title. · Press the GOTO button to set your desired point to start playback, then press the ENTER button to confirm. Angle setting · The current angle is displayed. When a disc with only one angle is played back, " · Press the ANGLE button to select the desired angle. Angle 1/1 " is displayed. Audio setting · The type of audio currently selected is displayed. · Press the AUDIO button to select your desired type of audio. Subtitle setting · The subtitle number and language currently selected is displayed. [. . . ] · NEVER use solvents such as benzine or alcohol to clean the disc. · Do NOT use irregular shape discs (example : heart shaped, octagonal, etc. ). They may cause malfunctions. Cleaning the Unit · Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth. [. . . ]