User manual AKAI ACV6507D

[. . . ] SAFETY PRECAUTIONS The following mark and symbols are located on bottom of the unit. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. Marking sign is located on bottom of the unit. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM This product contains a low power laser device. C LA SS 1 LA SER P RO D U CT A P P A R E IL À LA S E R D E C L A S S E 1 P R O D U C TO LA S E R D E C L A SE 1 P R OD U TO LAS ER C LA S SE 1 The symbol for Class II (Double lnsulation) This symbol means that the unit complies with European safely and electrical interference directives. On Placement · Do not use the unit in places which are extremely hot, cold, dusty, or humid. [. . . ] · Turn off the unit before unplugging AC power the AC adapter from the unit so as to To AC adapter cord avoid the unit being damaged. Left side of unit To DC IN 12V jack · The mains plug is used as the disconnect device, the disconnect POWER DC IN 12V OFF ON device shall remain readily operable. · When the unit is not going to be used To AC outlet for long time, disconnect the AC power supply cord from the AC outlet. If a malfunction occurs, disconnect the plug from the wall outlet at once. · When the AC Power supply cord is connected, the power indicator on the AC adapter will remain on although the unit is turned off. Disconnect the AC power supply cord from the AC outlet when not in use. · When the adapter is plugged in, the apparatus is not completely disconnected from the main, even when the power is turned off. 2 1 3 GB - 9 CONNECTIONS Connecting the Monitors · Use the included DIN cables to connect the monitors to the main unit. Monitors CONNECT TO MAIN UNIT port (Input) CONNECT TO MAIN UNIT port (Input) DIN CABLES Connect to MONITOR ports (Output) Main unit Using Headphones/Earphones · Turn down the volume before connecting the Headphones/Earphones. Slowly raise the volume with the headphones/earphones on until you reach your desired volume. · When headphones/earphones are connected to the monitors, the speakers will be disabled. Caution: · Listening to audio at an excessive volume can permanently damage your hearing. Headphones/ Earphones (3. 5mm diameter plug) Headphones/ Earphones (3. 5mm diameter plug) Right side of unit Bottom of Monitor GB - 10 CONNECTIONS Using this Unit with Other Equipment A. Connecting Game Systems/Video Equipment · You can connect Game Systems or other Video Equipment for playback through the monitors. AV IN DVD Right side of unit MONITOR 2 AV IN AV IN DVD MONITOR 1 AV IN DVD (Yellow) (Red) (Yellow) To AV IN Jack (White) (Red) (White) AUDIO/VIDEO CABLE (not included) Game Systems/ Video Equipment AUDIO/VIDEO CABLE (included) Yellow (video) Ground White (audio L ) Red (audio R ) Watching Video Equipment 1. Turn on the unit, slide the AV IN / DVD switch to "AV IN". 2. Turn on the video equipment and follow the instructions provided with it to playback. Note: If you have a mono VCR, the volume level from the speakers will be low. B. Connecting the Video Game System Right side of unit (Yellow) (Red) To AV IN Jack Yellow (Video) Ground White (Audio L ) Red (Audio R ) (White) AUDIO/VIDEO CABLE (included) Playing a Video Game System 1. Turn on the unit, slide the AV IN / DVD switch to select "AV IN". 2. Turn on the video game system and follow the instructions provided with it to play game. GB - 11 (continued on next page) CONNECTIONS C. Connecting a Stereo Receiver or Amplifier Analog connection Rear of unit (No need to connect the Yellow video plug) (Red) (Yellow) (Red) (White) AUDIO/VIDEO CABLE (not included) Stereo Receiver or Amplifier (White) AUDIO/VIDEO CABLE (included) Connecting to a Surround Sound System Rear of unit Audio equipment with digital audio input jack COAXIAL DIGITAL AUDIO CABLE (not included) Listening to another audio equipment 1. Turn on the Unit. 2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN or DIGITAL IN function. Notes: · You may experience some interference if the radio tuner function is selected while the television is working. · Make sure to use the correct Audio/Video cable, connecting the plugs incorrectly may cause a weak signal. · If you have a stereo VCR, make sure you set it to stereo mode. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. Connecting the unit to a TV · This DVD Player can be used with a TV that has A/V inputs. [. . . ] 2. Use or button to select Audio, press the ENTER button repeatedly to select Digital Out type. 3. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. Language Video Audio Rating Digital Out Raw Raw : Use this setting when the unit is connected to an external Dolby Digital decoder. PCM : Use this setting when the unit is connected to an external surround decoder or stereo. RATING setting DVD discs equipped with a password function and are rated according to their content. The contents allowed by parental lock level and the way a DVD disc is controlled may vary from disc to disc. [. . . ]