User manual AIWA XD-DW1 DOCUMENT

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. [. . . ] · With DVDs, the memorized point is canceled by pressing s twice during playback. ENGLISH 20 PROGRAM ENTER jlik C jlikENTER c(Play) s ONSCREEN DISPLAY ON/OFF DISPLAY c(Play) s Programed playback (Video CD with PBC off, audio CD) With video and audio CDs, you can select the tracks you would like to play, and play them in any order. You can also repeat programed selections. 2 Press j or l to select the "Playback mode" icon, then press i or k to select "PRG". PRG 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 3 4 Press ENTER. A programing screen is displayed on the display. To program with the PROGRAM button Press PROGRAM on the remote control either when playing, or while the resume function is active. Within 10 seconds press i or k to select "PRG", then press ENTER. Then go to step 4. Press j or l to select the number of the track you want to program. Then press ENTER. PROGRAM MENU DISC 1 6 11 16 21 2 7 12 17 22 3 8 13 18 23 4 9 14 19 5 10 15 20 7 -----RETURN START PROGRAM -18 3 - - - -- -- -- --- -- -- --- -- -- --- -- -- --- -- -C AC If you enter the wrong number Press C to delete the number. 5 21 ENGLISH Repeat step 4 to program other tracks. 6 Press ikjl to select "START", then press ENTER. Playback begins from the specified track. You can also start playback with c(Play). PROGRAM MENU Random playback (Video CD with PBC off, audio CD) You can playback tracks in random order. (Random playback) DISC 1 6 11 16 21 2 7 12 17 22 3 8 13 18 23 4 9 14 19 5 10 15 20 7 -----RETURN START PROGRAM -18 3 - - - -- -- -- --- -- -- --- -- -- --- -- -- --- -- -- -C AC 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. To delete a programed track On the programing screen, select "C" with j or l. You can also delete the last program with C on the remote control. 2 Press j or l to select the "Playback mode" icon. OFF To clear the programed contents At the programing screen, select "AC" with j or l. When s is pressed twice, the disc cover is opened, or the power is turned off, all the programed contents are also cleared. 3 Press i or k to select "RND". RND Adding a programed track in stop mode Show the programing screen and select tracks. The selected track is programed to the last position. 4 Press ENTER. Random playback begins. To operate with the PROGRAM button To cancel programed playback Press s. Programed playback is canceled by stopping playback. Press PROGRAM on the remote control either when playing, or while the resume function is active. · The number of audio tracks available differs from disc to disc. 1 While playing, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 2 Press j or l to select the "Audio track" icon. 0:06:30 1= Q EN 2ch OFF 3 Press i or k to select the audio track. The audio track will change each time you press i or k. 0:06:30 2= Q SP 2ch OFF When using the AUDIO SELECT button Press AUDIO SELECT on the remote control during playback. The audio track will change each time you press the button. 27 ENGLISH Selecting karaoke audio (video CD, DVD) The method of recording the vocal audio may differ from disc to disc. This DVD player allows you to select the right method for the disc, so that you can use any karaoke disc. Video CD karaoke: DVD karaoke: 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 1 While playing, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 2 2 Press j or l to select the "Audio track" icon. 06:30 STEREO Press j or l to select the "Audio track" icon. 0:06:30 1 KARAOKE Q EN ­ ­ OFF When using the AUDIO SELECT button Press AUDIO SELECT on the remote control when playing or while the resume function is active. Then press ENTER. The audio track will change each time you press i or k. Example: A disc has 2 audio tracks (track 1 and track 2), and track 1 has 2 vocal channels. 1 KARAOKE Q EN VOCAL 1 OFF 3 Press i or k to select the audio track. The audio track will change each time you press i or k. 00:06:30 06:30 LEFT 00:06:30 1 KARAOKE Q EN VOCAL 2 OFF 00:06:30 06:30 RIGHT 1 KARAOKE Q EN VOCAL 1+2 OFF 00:06:30 1 KARAOKE Q EN ­ ­ OFF 06:30 STEREO Video CD karaoke discs typically have the vocals recorded on the right channel. Refer to the instructions with the karaoke disc for more information. NOTES · Refer to the instructions with the karaoke disc for more information. · This function is available only when the "Digital Output" is set to "2 CH 48 kHz 16 bit PCM". CONTINUE ENGLISH 28 Changingtheaudiotrack(continued) Selecting Q surround (DVD) Even when only two speakers are used for the left and right, Q SURROUND makes the sounds rich and wide as if you are surrounded by two front speakers and two rear speakers. 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 2 Press j or l to select the "Q surround" icon. 1=Q EN 2ch OFF 0:06:30 3 Press i or k to select "ON" or "OFF". 0:06:30 1=Q EN 2ch ON When using the Q SURROUND button When pressing Q SURROUND on the remote control during playback, the Q surround mode can be selected directly. NOTE When s is pressed twice, or the disc cover is opened, Q SURROUND is canceled. 29 ENGLISH SET UP OPERATION Changing setup values 0-9 RETURN ikENTER ik SET UP SETUP vRETURN ENTER Basic operations Your DVD player comes from the factory with all the basic items set properly. Change any other settings according to your individual setup and preferences. Disc Languages (Page 32) Sets the audio soundtrack language, subtitle language, and the language used in the menu screen. If the language selected by these settings does not exist on the disc, the disc's default language is used. Digital output (Page 34) Sets the optical digital out to output either by bitstream or by linear PCM. [. . . ] We recommend connecting an S-VIDEO cord (supplied) to the TV set and S-VIDEO terminal. ENGLISH 46 Specifications Main unit Power supply DC 9 V Power consumption 18 W Weight Main unit: 670 g (23. 5 oz) Battery pack: 560 g (19. 6 oz) External dimensions XD-DW1: 195 (W) × 26. 9 (H) × 144 (D) mm (73/4 × 11/16 × 53/4 in. ) XD-DW5: 195 (W) × 31. 9 (H) × 144 (D) mm (73/4 × 15/16 × 53/4 in. ) Signal format NTSC Supported discs DVD video discs 12 cm (single-sided singlelayer, single-sided doublelayer, double-sided-double layer) 8 cm (single-sided singlelayer, single-sided doublelayer, double-sided-double layer) Compact discs (CD-DA, video CD) 12 cm and 8 cm discs S1 video output Y output: 1 Vp-p (75 ohms, sync negative) C output: 0. 286 Vp-p Video output Video composite output 1 Vp-p (75 ohms, sync negative) RCA jacks Audio output DOWN MIXING AUDIO OUT connector 1. 5 Vrms (1 kHz) 2 RCA jacks (L/R) Fiber optical connector (IEC 958) Audio output characteristics Frequency range: CD/VCD: 20 Hz to 20 kHz DVD: 4 Hz to 22 kHz (48 kHz sampling) Wow and flutter: unmeasurable Operating conditions 5°C to 35°C (41°F to 95°F) Accessories Remote control (1) Battery pack (1) AC adaptor (2) AC power cord (2) Audio connecting cable (1) Video connecting cable (1) S-Video connecting cable (1) AC adaptor (for the main unit) Model No. Input Output AC-D918U 100-240 V AC, 50/60 Hz, 30 W DC 9 V, 2 A AC-D920U 100-240 V AC, 50/60 Hz, 36 W DC 9 V, 2. 2 A AC adaptor (for recharging the battery pack) Specifications are subject to change without notice. 47 ENGLISH · Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. · Manufactured under license from Digital Theater Systems, Inc. [. . . ]