User manual AIWA XD-DV290 DOCUMENT

[. . . ] - Do not install the unit in a bookcase, cabinet, or airtight rack where ventilation may be impeded. 5 Foreign objects and liquid -- Be careful that foreign objects or liquid do not enter the unit through the ventilation openings. 6 Carts and stands -- The unit should be moved with care when placed or mounted on a stand or cart. Sudden stops, excessive force, or an uneven surface may cause the unit or cart to fall over. [. . . ] TV TYPE When your TV set is a conventional-screen size TV: [4:3 LB ] When your TV set is a wide-screen size TV: [16:9 ] NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . CONTINUE ENGLISH 13 PREPARATIONS CONNECTIONS (CONTINUED) D Connecting to an AV receiver equipped with a Dolby Digital (AC-3) or DTS decoder Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an a Digital In jack. The supplied video cord is also available instead of the coaxial cord. AV receiver with TV set to a video input jack (yellow) Video cord (supplied) yellow yellow to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit AUDIO OUT VIDEO OUT S-VIDEO R L Rear of the unit COAXIAL OPTICAL DIGITAL AUDIO OUT to DIGITAL AUDIO OUT COAXIAL jack to DIGITAL AUDIO OUT OPTICAL jack Optical cord (not supplied) to an AC outlet Coaxial cord (not supplied) to a digital input jack Receiver equipped with a Dolby Digital decoder or DTS decoder Front speaker (L) Surround speaker (L) Center speaker Subwoofer Surround speaker (R) Front speaker (R) When your TV set is equipped with an S-video input terminal, see page 16. Set the setup menu correctly after connecting! According to the audio equipment and TV set to which this unit is connected, set the "AUD OUT" and "TV TYPE" of the setup menu correctly referring to the following below See "CHANGING SETUP VALUE" on page 32 in detail. AUD OUT [BITSTREAM] TV TYPE When your TV set is a conventional-screen size TV: [4:3 LB ] When your TV set is a wide-screen size TV: [16:9 ] . NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . CAUTION If the AV receiver is not equipped with a Dolby Digital or DTS decoder, do not select "BITSTREAM" in the "AUD OUT" when connecting the AV receiver with an optical or coaxial connecting cord. Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select "DIGITAL PCM" in the "AUD OUT". 14 ENGLISH E Connecting to a TV set and an AV receiver with the Dolby Pro Logic Surround system TV set to a video input jack (yellow) Video cord (supplied) yellow to VIDEO OUT 1 or 2 jack (yellow) AUDIO OUT VIDEO OUT S-VIDEO R L Rear of the unit COAXIAL OPTICAL DIGITAL AUDIO OUT to AUDIO OUT L (white)/ R (red) jacks white red to an AC outlet Audio cord (supplied) Receiver equipped with Dolby Pro Logic Surround to an audio input jacks (Left/ white, Right/ red) Front speaker (L) Front speaker (R) Center speaker Surround speaker (L) Surround speaker (R) En When your TV set is equipped with an S-video input terminal, see page 16. Set the setup menu correctly after connecting! According to the audio equipment and TV set to which this unit is connected, set the "TV TYPE" of the setup menu correctly referring to the following below . TV TYPE When your TV set is a conventional-screen size TV: [4:3 LB ] When your TV set is a wide-screen size TV: [16:9 ] NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . CONTINUE ENGLISH 15 PREPARATIONS CONNECTIONS (CONTINUED) Connecting to a TV set equipped with S-video jack Rear of TV set S-video input connector (S1, S2) S-video cord (not supplied) to S-VIDEO OUT connector AUDIO OUT VIDEO OUT S-VIDEO R L Rear of the unit COAXIAL OPTICAL DIGITAL AUDIO OUT to an AC outlet Set the setup menu correctly after connecting!Set the "TV TYPE" of the setup menu correctly referring to the following below . The "aiwa DVD VIDEO" screen does not move around only while displaying setup menu on TV screen, even if the unit stopped. The PBC ON/OFF menu changes to "PBC : [OFF]" , then it will disappear after 2 seconds. If PBC is turned off while stopping, the unit automatically starts playback. To turn on PBC Repeat the step 1 and 2 above. When OPEN/CLOSE is pressed, the unit also automatically turns on PBC. To turn the power off Press POWER on the remote control. The unit enters the power standby mode, and the 6STANDBY/ON indicator turns red. If 15 minutes have elapsed without performing any operations This unit automatically returns to the power standby mode, when stopped without performing any operations for 15 minutes. The unit does not return to the power standby mode, only while displaying setup menu on TV screen. Digest menu The pictures divided into 9 are displayed. 1 Press TOP MENU either while playing or when stopped. En When the unit plays back: The current track playing is divided into 9 random intervals, then the pictures which were divided into 9 will be displayed on TV screen. When the unit stops: The each beginning of pictures up to the first 9 tracks on the disc will be displayed on TV screen. If only one track is recorded on the disc, one picture is displayed. 2 NOTE Press the numbered buttons or press i/k/j /l to select the desired picture, then press ENTER or c. The unit will start playback from the selected point of the track. PBC function turns off when this function is activated. CONTINUE ENGLISH 19 BASIC OPERATIONS PLAYBACK (CONTINUED) Still (Pause) a c Press a during playback. To return to normal playback Press c or ENTER. rt s Frame advance Press a while the disc is paused. Each time you press the button, the program advances one frame. CLEAR i/k/j/l/ ENTER a r s SLOW c g t f Numbered buttons Stopping playback Press s. When s is pressed during playback, the unit remembers the point at which playback stopped. (resume function) To resume playback from the point where it stopped Press c or ENTER. To clear the point to be resumed Press s again. [. . . ] For example, folder A can contain folder B, and folder B can contain folder C; this is called "nesting of folders". · Writing utilities There are 3 utilities used to record data on a disc. DAO (Disc At Once) utility All data to be written must be prepared in advance and written onto a disc from the beginning to the end in one operation. No data can be added to a disc on which data were already written with DAO utility. [. . . ]