User manual AIWA XA-950 SERVICE MANUAL

[. . . ] PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. [. . . ] Choose OK. TO PRINT TILED VERSION OF SCHEMATICS Schematic pages that are larger than 11" x 17" full-size are provided in a 11" x 17" printable tiled format near the end of the document. These can be printed to tabloid-sized paper and assembled to full-size for easy viewing. If you have access to a printer capable of outputting the tabloid size (11" x 17") paper, then output the tiled version of the diagram as follows: 1) Note the page number(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen. Confirm that the plotter settings are set to output 11" x 17", or tabloid size paper in landscape ( ) mode. Select "Print. . . " Input the page number of the schematic(s) you want to print in the print range window. TO PRINT SPECIFIC SECTIONS OF A SCHEMATIC To print just a particular section of a PDF, rather than a full page, access the Graphics Select tool in the Acrobat Reader tool bar. 1) To view the Graphics Select Tool, press and HOLD the mouse button over the Text Select Tool which looks like: T This tool will expand to reveal to additional tools. Choose the Graphics Select tool by placing the cursor over the button on of the far right that looks like: 2) After selecting the Graphics Select Tool, place your cursor in the document window and the cursor will change to a plus (+) symbol. [. . . ] Select OK and the output will print only the area that you outlined with the marquee. [. . . ]