User manual AIWA JAX-N5

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] To cancel the dimmer Repeat the above and select "OFF" in step 2 . 2 Press r or t repeatedly until "CLOCK SET" appears in the display and then press ENTER. If "- -:- -" appears when the unit is turned off There has been a power interruption. To replace disc(s) during playback without interruption While one disc is being played back, press DISC CHANGE so that the compartment opens, replace disc(s) with other one(s), and press DISC CHANGE to close the compartment. 2 Turn MULTI JOG to select one of the two repeat modes as below or "REPEAT OFF", and then press ENTER. If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled. With the numbered buttons on the remote, - To select track 10, press 0/10. To search (playback in fast forward or fast reverse) Hold down f or g. To display the remaining time of the track or the disc Press DISPLAY on the remote repeatedly during playback. The display changes cyclically as follows: Track number and elapsed playing time of the current track Track number and remaining time of the current track Remaining time of the current disc Clock display (for 6 seconds) Press zOPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up. To place three discs, press DISC CHANGE so that the trays rotate, then place the third one. On the remote, press REPEAT repeatedly until """ or ""1" appears and carry out step 3. To cancel repeat playback Carry out step 1 and 2, and select "REPEAT OFF" in step 2. 2 To play all discs, press c (c /d on the remote), then "ALL DISCS" lights up in the display To play one desired disc, press DISC DIRECT PLAY 1-3, then "1 DISC" lights up in the display If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled. If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled. To add tracks to the program Repeat step 2 and 3 before starting playback. To cancel programed playback Carry out step 1 and 2, and select "CONTINUE" in step 2. The program contents are retained even if the program is canceled or after programed playback finishes. On the remote, press PLAY MODE repeatedly until "SHUF" lights up and carry out step 3. To cancel shuffle playback Carry out step 1 and 2, and select "CONTINUE" in step 2. The selected track number and the program number appear in the display. Press zPUSH EJECT to open the cassette holder, and insert with the exposed side down and the side to be recorded on facing out from the unit. [. . . ] Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. If the unit surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. After every 10 hours of use, clean the tape heads by using sold dry-type or wet-type head cleaning cassette separately. To demagnetize the tape heads Use a sold demagnetizing cassette after every 20 to 30 hours of use. [. . . ]