User manual AIWA AWP-ZX7

[. . . ] 4-254-179-11(2) Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Refer to them whenever you call upon your Aiwa dealer regarding this product. ______________ ©2004 Sony Corporation CAUTION WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] t 10min t OFF * The system automatically turns off in 100 minutes or after the current CD or tape finishes playing. 2 Press ­ or + repeatedly to adjust the level while "BASS" or "TREBLE" appears. Other operations To Press To adjust the bass on the unit Turn BASS control. Check the SLEEP once. remaining time* Change the time to turn off SLEEP repeatedly to select the time you want. To adjust the treble on the unit Turn TREBLE control. To exit the bass and treble settings Press any button other than EQ or +/­. Also, if you do not perform any operations for a few seconds, the display automatically returns to the original display. Cancel the Sleep SLEEP repeatedly until "OFF" Timer Function appears. * You cannot check the remaining time if you select "AUTO". Tip You can use the Sleep Timer, even if you have not set the clock. Adjusting the i-Bass You can reinforce the bass and create a more powerful sound. Press i-Bass on the unit. Each time you press the button, the display changes cyclically as follows: i-Bass 1* t i-Bass 2* t i-Bass OFF * The i-Bass indicator changes. 20GB Waking up to music -- Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. 9 To Press ?/1 to turn off the system. Other operations Do this Activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT PLAY SEL?" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Prepare the sound source you want to play. · CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 13). · TAPE: Load a tape (see "Playing a tape" on page 17). · FM or AM: Tune in the preset radio station (see "Listening to the radio" on page 15). 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT TIMER OFF?" appears, then press ENTER. Notes Sound Adjustment/Timer 2 3 4 Press VOLUME +/­ to adjust the volume. or > repeatedly until "PLAY SET?" appears, then press ENTER. "ON TIME" appears and the hour indication flashes. 5 Set the time to start playing. · You cannot activate the Play Timer and Rec Timer at the same time. · If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the Play Timer will not be activated. · You cannot use the optional component connected to AUX IN jacks or USB port as the sound source for Play Timer. Press . or > repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. "PLAY TIMER", the start time, the stop time and the sound source appear in turn, then the original display returns. 21GB Timer recording radio programs -- Rec Timer You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. 10 Press ?/1 to turn off the system. Other operations To Do this Activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT REC SEL?" appears, then press ENTER. [. . . ] · When using discs that have glue or similar tacky substance on the label side of the disc or that used a special ink when the label was printed, there is a chance that the disc or label may become attached to parts inside this unit. When this occurs, it may not be possible to remove the disc, and may also cause this unit to malfunction. Be sure to check that the label side of the disc is not sticky before using. The following types of disc should not be used: ­ Rental or used discs with attached seals where the glue extends beyond the seal. [. . . ]