User manual AIWA AD-F990

[. . . ] The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8. 5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled. [. . . ] Those diagrams that are LARGER than 11" x 17" in full-size mode have been tiled for your convience and can be printed on standard 11" x 17" (tabloid-size) paper, and reassembled. TO PRINT FULL SIZE SCHEMATIC DIAGRAMS If you have access to a large paper plotter or printer capable of outputting the full-sized diagrams, output as follows: 1) Note the page size(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen. Confirm that the printer settings are set to output the indicated page size or larger. Select "Print. . . " Input the page number of the schematic(s) you want to print in the print range window. Choose OK. TO PRINT TILED VERSION OF SCHEMATICS Schematic pages that are larger than 11" x 17" full-size are provided in a 11" x 17" printable tiled format near the end of the document. Choose the Graphics Select tool by placing the cursor over the button on of the far right that looks like: 2) After selecting the Graphics Select Tool, place your cursor in the document window and the cursor will change to a plus (+) symbol. When you release the mouse button, a marquee (or dotted lined box) will be displayed outlining the area you selected. 3) With the marquee in place, go to the file menu and select the "Print. . . " option. When the print window appears, choose the option under the section called "Print Range" which says "Selected Graphic". [. . . ] When the print window appears, choose the option under the section called "Print Range" which says "Selected Graphic". [. . . ]