User manual AIRLIVE WP-201G V2

[. . . ] WP-201G v2 802. 11g Wireless USB Print Server User's Manual AirLive WP-201G v2 User's Manual 0 Declaration of Conformity OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product We, Manufacturer/Importer 802. 11g Wireless USB2. 0 Print Server AirLive WP-201G v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50371:2002 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public business equipment EN 301 489-1 V1. 6. 1 EN 60950-1:2001+A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/5/5 AirLive WP-201G v2 CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WP-201G v2 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. deklaruoja, kad sis AirLive WP-201G v2 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. [. . . ] You can set up the IP address on the various UNIX systems using any one of the following methods: 1. BOOTP (Bootstrap Protocol) The print server will use the last three methods to obtain its IP address automatically if its IP address is configured as Auto (0. 0. 0. 0). AirLive WP-201G v2 User's Manual 33 6. 3. 1 DHCP There are many UNIX systems that support DHCP protocol, and the procedures to configure the DHCP server database are different. This manual does not describe the DHCP server configuration on the UNIX systems. It is highly recommended that the DHCP server should be located on the same network as the print server. 6. 3. 2 BOOTP If you have the BOOTP daemon, bootpd, running on your UNIX system that is accessible by the print server, you can use the BOOTP protocol to set up the IP address of the print server. We recommend that the BOOTP server should be located on the same subnet as the print server. If you use Network Information Services (NIS) in your system, you may need to rebuild the NIS map with the BOOTP services before doing the following BOOTP configuration. To configure the IP address data for the BOOTP server, you will need to log in the host of BOOTP server as the superuser (root). Optionally, assign a name corresponding to the print server's IP address. You can add this address to the /etc/hosts file, by adding a line such as: 203. 66. 191. 12 pserver 2. Add an entry to the host's /etc/bootptab file, similar to the following: hostname:\ :ht=1:\ :ha=print_server_ethernet_address:\ :ip=print_server_ip_address: Lines should be indented with tabs. Where hostname is the device name of a print server, the ht=1 tag specifies the hardware type is Ethernet, the ha= tag specifies the Ethernet address of a print server, which is the Node ID located on the print server. The ip= tag should correspond to the IP address you want to assign to the print server. For example, a print server with the following configuration: Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203. 66. 191. 12 AirLive WP-201G v2 User's Manual 34 The entry for this print server in the /etc/bootptab file should be: PS010101:\ :ht=1:\ :ha=0000B4010101:\ :ip=203. 66. 191. 12: 6. 4 Verify Print Server's IP Address To verify that your print server is responding to the newly assigned IP address using a PING command: ping ip-address 6. 5 Configure Remote LPD Printing on the Host The procedure you use to configure your UNIX host(s) to allow printing to your network remote print server varies between different varieties of UNIX. The procedures below can be used for UNIX variants that are related to BSD UNIX, such as SunOS or Linux. For other versions of UNIX, consult your system documentation, keeping in mind that: 1. The print server should be treated as a BSD networked print server host. The host name should be the name (or IP address) that you have assigned to the print server. The printer name (or queue name) on the remote host should be p1, p2, or p3, the name of the printer port on the print server. You will need to perform the tasks below, logged in as the superuser (root) to configure your UNIX host for printing. Optionally, assign a name corresponding to the print server's IP address. You can add this address to the /etc/hosts file, by adding a line such as: 203. 66. 191. 186 pserver 2. Create a spool directory for the printer in the same directory where spool directories are normally kept on the machine, such as /var/spool or /var/spool/lpd: mkdir /var/spool/lpd/pserverd chown daemon /var/spool/lpd/pserverd chgrp daemon /var/spool/lpd/pserverd chmod 775 / var/spool/lpd/pserverd AirLive WP-201G v2 User's Manual 35 3. [. . . ] Hex value set key1284 0123456789ab The value should be 26 digit cdef0123456789a ip gateway submask polling IP of the print server Default gateway of the print server Subnet mask of the print server Polling interval (in second) of the print server for waiting printing jobs on the NetWare server set ip 192. 168. 2. 2 set gateway 192. 168. 2. 255. 0 set polling 3 aq1 applezone Name of the printer queue on set aq1 PQ1 the NetWare server The name of AppleTalk zone set applezone * that this print server joins to Argument printertype1 Description The type of the printer attached to this print server Example set printertype1 LaserW riter SMBDG The name of the SMB group set SMBDG default name that this print server joins to SNMPC The administrator contact set SNMPC sbdjohn@hotm information of this print ail. com server for SNMP SNMPL port1 DHCPS The installed location of set SNMPL Room 301 this print server for SNMP The port name of this print set port1 p1 server Enable or disable the DHCP set DHCPS disable server. AirLive WP-201G v2 User's Manual 79 The value should be "disabled" or "enabled". DHCP Enable or disable to get dynamic IP by DHCP. The value should be "disabled" or "enabled". set DHCP disable appletalk Enable or disable AppleTalk set appletalk disable printing The value should be "disabled" or "enabled". SMBD Enable or disable SMB printing The value should be "disabled" or "enabled". set SMBD enable SNMP Enable or disable SNMP management protocol The value should be "disabled" or "enabled". set SNMP enable IPX Enable or disable NetWare set IPX enable Bindery printing The value should be "disabled" or "enabled". LPD Enable or disable LPR printing The value should be "disabled" or "enabled". set LPD enable IPP Enable or disable IPP printing The value should be "disabled" or "enabled". set IPP enable RAW Enable or disable RAW printing The value should be "disabled" or "enabled". set RAW enable AirLive WP-201G v2 User's Manual 80 9. 5 Other Commands 9. 5. 1 ipconfig "ipconfig" command is used to quickly get the IP settings (IP, subnet mask, default gateway) of the print sever: Admin# ipconfig IP_ADDR=192. 168. 2. 2 SUBNET_MASK=255. 255. 255. 0 DEFAULT_GATEWAY=192. 168. 2. 254 9. 5. 2 reboot "reboot" command is used to restart the print server: admin# reboot 9. 5. 3 exit "exit" command is used to leave the print server telnet management: Admin# exit 9. 5. 4 help "help" command is used to list all telnet management commands of the print server: admin# help set argument value get argument ipconfig reboot exit AirLive WP-201G v2 User's Manual 81 Chapter 10: IPP Printing 10. 1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of remote printing service by TCP/IP. Any PC that can support IPP printing, for example Windows 2000/XP can directly use the print server by IP. [. . . ]