User manual AIRLIVE WMU-6500FS

[. . . ] WMU-6500FS 3. 5" Wireless AP Storage User's Manual 1 This device uses software which is partly or completely licensed under the terms of the GNU General Public License. A fee will be charged for production and shipment for each copy of the source code. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. [. . . ] Or you can decide the security level later if you don't have any idea yet. If you choose Decide it later, the AirLive WMU-6500FS won't do any change to your hard disk. So you can keep all your data which has been stored in the hard disk. If you choose Guest Mode, it's not necessary to initial your hard disk drive. As a result, if you use a whole new hard disk, please select "Yes". If you already have data in this hard disk, you might want to select "No". This option would format your hard disk to one partition if you select "Yes". WARNING: The format process will erase all your data which has been stored in your hard disk drive. 24 AirLive WMU-6500FS User's Manual If you select "Yes", the AirLive WMU-6500FS would ask you one more time to confirm your decision. If you need to format disk, please wait the progressing bar become 100%. WARNING: Even there is only one partition in your hard disk, the AirLive WMU-6500FS will format your hard disk again if you press OK. If you choose Authorization Mode, it's necessary to initial your hard disk drive. The public directory will store data which can be accessed by any user. But only authorized user can access data which is stored in their home directory in the private directory. Please indicate capacities for public directory and private directory separately. After you indicate capacity for one directory, the rest of capacity can be assign to the other directory automatically. The easy copy button in the front panel is going to copy folders/files from USB drive to public directory while you activate authorization mode. 25 AirLive WMU-6500FS User's Manual WARNING: The initialization will erase all your data which has been stored in the hard disk. Step 6: This page will show the configurations that you choose, please check your settings again before saving. Click "Discard Settings", then you would return to the first page and without saving any changes. If you want to change any setting, please click "Previous" button to go back to previous page. Finally, if everything is okay, click "Save Settings" to save your new settings. If you choose to initialize or format hard disk, please wait the progressing bar become 100%. 26 AirLive WMU-6500FS User's Manual WARNING: Do Not press any button or power off the AirLive WMU-6500FS when the format is in progress. Please wait 30 seconds at least for system restarting. 3. 2 Network Settings 3. 2. 1 DHCP Setting Following sections describe the various DHCP settings. 27 AirLive WMU-6500FS User's Manual General Settings: default machine IP is 192. 168. 123. 254. Host name is the identification of AirLive WMU-6500FS when you browse it in Microsoft My Network Places. DCHP Mode: The default mode is "Auto" Client: If you have a DHCP server on the network, set this option to receive an automatic IP address and subnet mask assignment. Server: The AirLive WMU-6500FS will become a DHCP server on the network. Auto: Select this option to let AirLive WMU-6500FS send out a DCHP request during boot up. If you have another DHCP server on the network, the AirLive WMU-6500FS will receive an automatic IP address and subnet mask assignment. [. . . ] Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support. microsoft. com/default. aspx?scid=kb; en-us;313664) DUT Configuration: 1. The following test will use the built-in 802. 1X authentication method such as EAP_TLS, PEAP_CHAPv2 (Windows XP with SP1 only), and PEAP_TLS (Windows XP with SP1 only) using the Smart Card or other 62 AirLive WMU-6500FS User's Manual Certificate of the Windows XP Professional. DUT and Windows 2000 RADIUS Server Setup 1. We have to change authentication method to MD5_Challenge or using smart card or other certificate on RADIUS server according to the test condition. We will change 802. 1X encryption key length to fit the variable test condition. [. . . ]