User manual AIRLIVE WL-5470POE

[. . . ] WL-5470POE 54Mbps PoE Multi-Function Wireless AP User's Manual Declaration of Conformity OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product We, Manufacturer/Importer 802. 11b/g Multi-Function Wireless Access Point AirLive WL-5470POE is in conformity with In accordance with 89/336/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50371:2002 EN 301 489-1 V1. 6. 1 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0Hz ­ 300GHz ) business equipment EN 50392:2004 EN 60950-1:2001+A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/10/15 AirLive WL-5470POE CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WL-5470POE je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. deklaruoja, kad sis AirLive WL-5470POE atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. [. . . ] An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. Channel Number: Allow user to set the channel manually or automatically. If "Auto" is selected, user can set the channel range to have Wireless Access Point automatically survey and choose the channel with best situation for communication. The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel. SSID of Extended Interface: This field is the SSID of remote Access Point to connect to. WL-5470 POE User's Manual 32 802. 1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths between network nodes. Spanning tree allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, without the danger of bridge loops, or the need for manual enabling/disabling of these backup links. Site Survey: Use this button to find out the remote Access Point and check the signal strength. To configure the security connection, please refer to Section 3. 9 Wireless Security Settings . . . . . . To configure the Advanced Settings, please refer to Section 3. 10 Advanced Wireless Settings . . . . . . To configure the access control, please refer to Section 3. 11 Access Control Settings . . . . . . To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . . 33 WL-5470 POE User's Manual 3. 6 WISP Mode Settings Client Mode Settings Router Settings Alias Name: Another name for WL-5470POE. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. SSID (Network ID): The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. WAN Port: WL-5470POE provides 4 methods for client to access the internet. You need to contact the ISP for detail information. WL-5470 POE User's Manual 34 Some ISP/WISP has special inquire for TTL feature that did not decrease the TTL value when pass the first router of ISP/WISP. When using PPPoE for WAN access, WL-5470POE provides flexible configuration for TTL value. The default value is 255 and does not have to change in a normal situation. You can check with your ISP/WISP if TTL value causes connection problem. 35 WL-5470 POE User's Manual Virtual Server: You can use Virtual Server Settings to provide connection on internet. For example, you can have your own web server at home and provide access on internet. [. . . ] Or click Upload to start the upgrade. WL-5470 POE User's Manual 64 4. 3 Save / Reload Settings This function enables users to save the current configurations as a file (i. e. config. dat) To load configuration from a file, enter the file name or click Browse. . . Save Settings to File: Click "SAVE" to save the current configuration to file. When prompted the upper left screen, select "Save this file to disk", and the upper right screen will prompt you a dialog box to enter the file name and the file location. if you want to load a pre-saved file, enter the file name with the correct path and then click on Upload. [. . . ]