User manual AIRLIVE WL-5470AP

[. . . ] WL-5470AP 802. 11g Hi Power Multifunction AP/Router User's Manual AirLive WL_5470AP User's Manual 1 Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 802. 11b/g Multi-function Wireless Access Point AirLive WL-5470AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public Safety for information technology equipment including electrical business equipment 300 328 V1. 7. 1 (2006-10) EN 301 489-1 V1. 5. 1 (2004-11) EN 301 489-17 V1. 2. 1 (2002-08) EN 50371:2002 EN 60950-1:2001/ A11:2004 marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/6/28 AirLive WL-5470AP CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WL-5470AP je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive WL-5470AP overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] Pre-authentication provides a way to establish a PMK security association before a client associates. The advantage is that the client reduces the time that it's disconnected to the network. Authentication RADIUS Server Enter the RADIUS Server IP address and Password provided by your ISP. Port: Enter the RADIUS Server's port number provided by your ISP. IP Address: Enter the RADIUS Server's IP Address provided by your ISP. Password: Enter the password that the AP shares with the RADIUS Server. Accounting RADIUS Server Advanced Settings Enter the Accounting RADIUS Server IP address and Password provided by your ISP Press the setup button for detail configurations It is not recommended that settings in this page to be changed unless advanced users want to change to meet their wireless environment for optimal performance. Fragment Threshold Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network. If your 802. 11g Wireless LAN PC Card often transmit large files in wireless network, you can enter new AirLive WL_5470AP User's Manual 20 Fragment Threshold value to split the packet. RTS Threshold RTS Threshold is a mechanism implemented to prevent the "Hidden Node" problem. "Hidden Node" is a situation in which two stations are within range of the same Access Point, but are not within range of each other. When a station starts data transmission with the Access Point, it might not notice that the other station is already using the wireless medium. When these two stations send data at the same time, they might collide when arriving simultaneously at the Access Point. The collision will most certainly result in a loss of messages for both stations. Thus, the RTS Threshold mechanism provides a solution to prevent data collisions. When you enable RTS Threshold on a suspect "hidden station", this station and its Access Point will use a Request to Send (RTS). The station will send an RTS to the Access Point, informing that it is going to transmit the data. Upon receipt, the Access Point will respond with a CTS message to all station within its range to notify all other stations to defer transmission. It will also confirm the requestor station that the Access Point has reserved it for the time-frame of the requested transmission. If the "Hidden Node" problem is an issue, please specify the packet size. The RTS mechanism will be activated if the data size exceeds the value you set. . Warning: Enabling RTS Threshold will cause redundant network overhead that could negatively affect the throughput performance instead of providing a remedy. [. . . ] BSSID BSSID displays the ID of current BSS, which uniquely identifies each BSS. LAN Configuration (TCP/IP) Connection Method: Physical Address: IP Address: Network Mask: Default Gateway: DHCP Server: DHCP Address: DHCP Address: Internet Configuration Connection Method: Display the internet connection method, you can setup in WISP mode WAN Port configuration Physical Address: IP Address: Display the AP MAC address information Display the internet IP Address, you can setup in WISP mode WAN Port configuration Network Mask: Display the network mask, you can setup in WISP mode WAN Port configuration Default Gateway: Display the default gateway , you can setup in WISP mode WAN Port configuration AirLive WL_5470AP User's Manual The time period since the device was up. The current version of the firmware installed in this device. Display the connection method, you can setup in TCP/IP section Display the LAN MAC address Display the LAN IP address, you can setup in TCP/IP section Display the network mask, you can setup in TCP/IP section Display the default gateway ip , you can setup in TCP/IP section Default the DHCP Server is enabled(ON) IP Display the DHCP server start IP address. Start Finish IP Display the DHCP server finish IP address. 39 Statistics The Statistics table shows the packets sent/received over wireless and ethernet LAN respectively. Active Clients Display the active Wireless Clients information: Wireless MAC address, Tx/Rx Packet, Tx Rate, and Power Saving information. AirLive WL_5470AP User's Manual 40 4. 11 TCP/IP In this page, you can change the TCP/IP settings of this Access Point, select to enable/disable the DHCP Client, 802. 1d Spanning Tree, and Clone MAC Address. IP Address This field can be modified only when DHCP Client is disabled. [. . . ]