User manual AIRLIVE WIAS-3200N

[. . . ] WIAS-3200N 802. 11n Internet Access Server User's Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive WIAS-3200N User's Manual Copyright and Disclaimer FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Restrain the Users Traffic Class: A Traffic Class can be chosen for a Group of users. There are four traffic classes: Voice, Video, Best-Effort and Background. When Best-Effort or Background is selected, more bandwidth management options such as Downlink and Uplink Bandwidth will appear. Total Downlink: Defines the maximum bandwidth allowed to be shared by clients. Individual Maximum Downlink: Defines the maximum downlink bandwidth allowed for an individual client. The Individual Maximum Downlink cannot exceed the value of Total Downlink. Individual Request Downlink: Defines the guaranteed minimum downlink bandwidth allowed for an individual client. The Individual Request Downlink cannot exceed the value of Total Downlink and Individual Maximum Downlink. Total Uplink: Defines the maximum uplink bandwidth allowed to be shared by clients. Individual Maximum Uplink: Defines the maximum uplink bandwidth allowed for an individual client. The Individual Maximum Uplink cannot exceed the value of Total Uplink. Individual Request Uplink: Defines the guaranteed minimum bandwidth allowed for an individual client. The Individual Request Uplink cannot exceed the value of Total Uplink and Individual Maximum Uplink. 6. 3. 5 Session Limit To prevent ill-behaved clients or malicious software from taking up the system's connection resources, the administrator can restrict the number of concurrent sessions that a user can establish. The maximum number of concurrent sessions including TCP and UDP for each user can be specified in the Global policy, which applies to authenticated users, users on a non-authenticated port, privileged users, and clients in DMZ zones. Also this can be specified in the other policies to apply to the authenticated users. 57 AirLive WIAS-3200N User's Manual 6. Restrain the Users When the number of a user's sessions reaches the session limit (a choice of Unlimited, 10, 25, 50, 100, 200, 350 and 500), the user will be implicitly suspended upon receipt of any new connection request. Since this basic protection mechanism may not be able to protect the system from all malicious DoS attacks, it is strongly recommended to build some immune capabilities (such as IDS or IPS solutions) in network deployment to maintain network operation. AirLive WIAS-3200N User's Manual 58 7. Access Network without Authentication 7 7. 1 DMZ 7 Access Network without Authentication Configure DMZ, go to: Network >> Network Address Translation >> DMZ (Demilitarized Zone). There are 20 sets of static Internal IP Address and External IP Address available. After the setup, accessing the External IP address listed in DMZ will be mapped to accessing the corresponding Internal IP Address. These settings will become effective immediately after clicking the Apply button. The External IP Address of the Automatic WAN IP Assignment is the IP address of External Interface (WAN) that will change dynamically if WAN Interface is Dynamic. When Automatic WAN IP Assignments is enabled, the entered Internal IP Address of Automatic WAN IP Assignment will be bound with WAN interface. 59 AirLive WIAS-3200N User's Manual 7. [. . . ] Service Disclaimer Content / Choose Billing Plan for PayPal Payment Page o o Service Disclaimer Content: View the service agreement and fees for the standard payment gateway services as well as add or edit the service disclaimer content here. Choose Billing Plan for PayPal Payment Page: These 10 plans are the plans in Billing Configuration, and the desired plan(s) can be enabled. Client's Purchasing Record / PayPal Payment Page Remark Content Client's Purchasing Record: o Starting Invoice Number: An invoice number may be provided as additional information against a transaction. o Title for Message to Seller: Enter the information that will appear in the header 129 AirLive WIAS-3200N User's Manual Appendix E. PayPal Payment Page Remark Content: The message content will be displayed as a special notice to end customers in the page of "Rate Plan". [. . . ]