User manual AIRLIVE VOIP-120A

[. . . ] VoIP-111A / 120A SIP VoIP ATA Adapter User's Manual AirLive VoIP-111A / 120A User's Manual 0 Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product SIP VOIP ATA Adapter VOIP-111A , VOIP-120A is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Limits and methods of measurement of radio disturbance characteristics of information technology equipment Disturbances in supply systems caused by household appliances and similar electrical equipment "Harmonics" Disturbances in supply systems caused by household appliances and similar electrical equipment "Voltage fluctuations" Information Technology equipment-Immunity characteristics-Limits And methods of measurement Safety for information technology equipment including electrical business equipment 55022:1994/A1 :1995/A2:1997 61000-3-2:2000 EN EN 61000-3-3:1995/ A1:2001 55024:1998/A1 :2001/A2:2003 60950-1:2001 EN EN CE marking Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/5/17 VOIP-111/120A CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento VOIP111/120A je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr VOIP-111/120A overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] -5You can connect your PC to the LAN port, set your PC as DHCP Client mode, then you can get IP addreess from the ATA. -7If no further changes are needed, please click the Save Change Item on the left side; then click the Save button. The changes you have made will be saved and the system will reboot automatically. Figure 14. Network Settings 17 AirLive VoIP-111A / 120A User's Manual 3. 7. 4 Bridge Setting: If you don't want to use the NAT Mode, then you can set the network setting in this page. -1The TCP/IP Configuration item is to setup the LAN port's network environment. You may refer to your current network environment to configure the VoIP Phone properly. -2If you change the LAN port's setting to Fix IP Mode, then you have to make sure the IP address. Net Mask, Gateway, and DNS setting is suitable in your current network environment. -3If you change the LAN port's setting to DHCP Client Mode, then you have to make sure in your current network environment has a DHCP server, then the TA will get the IP address from the DHCP Server. -4If you change the LAN port's setting to PPPoE Mode, you have to input a correct username/password to get the IP address from your Internet Service Provider. -5If you set the Bridge On, then the two Fast Ethernet ports will be transparent. Usually, we suggest you set the Bridge Mode is Enable, it will easy for you to connect any one of the port to the IP Network. -7If no further changes are needed, please click the Save Change Item on the left side; then click the Save button. The changes you have made will be saved and the system will reboot automatically. Figure 15. WAN Settings 18 AirLive VoIP-111A / 120A User's Manual 3. 7. 5 DDNS Setting: You can configure the DDNS setting in this page. You can have a DDNS account with a public IP address then others can call you via the DDNS account. If no further changes are needed, please click the Save Change Item on the left side; then click the Save button. The changes you have made will be saved and the system will reboot automatically. Figure 16. DDNS Setting 19 AirLive VoIP-111A / 120A User's Manual 3. 7. 6 VLAN Setting: You can set the VLAN setting in this page. First one is to set the packets related to the TA, and the second parts is if you use the VLAN setting in the NAT Mode. -1-2-3-4There are two kind of destination packets will come from the TA's WAN port: one kind of packets will go to the TA; the other will go through the LAN port to the PC. VLAN Packets: if you enable the first VLAN Packets and set the VID, User Priority, and CFI, then all the incoming packets will be check with the IP Address and the VID. [. . . ] 2 -autoanswer 3 -vol 4 -block 5 -ring 6 -forward 7 (null) -22- Description Show 'WatchDog' Option Enable WatchDog Disable WatchDog Show WatchDog Setting -23- Description Show 'phone' Option phone auto answer Volume setting Block Incoming call Set Melody Ringer Auto-forward Incall to Phone[0-9] in Book Show Phone Setting 41 AirLive VoIP-111A / 120A User's Manual -24- weblogo function Index Command 1 ?2 -on 3 -off 4 (null) Description Show 'weblogo' Option Vender Logo Default Logo Show weblogo Setting -25-26-27- dsp function is to show dsp code type. addport function is to add Nat Port Mapping cid function Index Command 1 ?2 -off 3 -1 4 -2 5 -3 6 -4 7 -5 8 -time 9 -single 10 (null) slic function Index Command 1 ? [. . . ]