User manual AIRLIVE OV-1000TSC

[. . . ] Are in conformity with Note on the FCC standard This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. [. . . ] In the event of any manufacturing fault or breakdown, it will be repaired by OvisLink Corp. This warranty shall not be applicable in the event of damage caused by improper use of the product, accidents, faulty handling or manipulation nor any future incompatibility with third party products. LED Indicator PWR 1000 LNK/ACT (UTP) Color Green Green Green Status ON OFF ON OFF ON Blinking OFF FDX/COL (UTP) Orange ON Blinking OFF LNK/ACT (Fiber) Green ON Blinking OFF FDX/COL (Fiber) Orange ON Blinking OFF Power ON Power OFF Works at 1000Mbps Not work at 1000Mbps Port is connected Transmitting/Receiving from UTP devices Port is not connected The UTP port is operating in full-duplex mode. Half-duplex mode or no device attached Port is connected Transmitting/Receiving from FX devices Port is not connected The fiber port is operating in full-duplex mode. Link Lost Forwarding (DIP-Switch 3): When LLF is enabled, it will allow UTP link failure to be reported to the Fiber side and also allow Fiber link failure to be reported to the UTP side. Therefore, a link loss forward feature is provided in both UTP and Fiber side. Connect the power adapter to the media converter and the power outlet. Please don't change the DIP-switch setting when UTP or fiber port is transmitting or receiving data. [. . . ] This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, HR, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR Declares that this device is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. [. . . ]