User manual AIRLIVE MFP-101U QUICK SETUP GUIDE

[. . . ] Before you start, you should have: One computer with Windows 2000 SP4 above and Windows XP SP1 above One Antenna (Only for Wireless MFP Server) One MFP or printer with USB port and an installation CD One Category 5 Ethernet Cable One USB Cable Plug the USB cable to the MFP Server with the MFP or printer that you want to share on the network. [. . . ] For the installation procedures in Windows 98SE/ME/NT and other operating systems, please refer to the manual of the MFP Server Tip: You have to uninstall all the MFP server drivers and utilities if you have installed the previous version. Once executed, the Setup program will extract files to launch the InstallShield Wizard; then, follow it step by step to complete the installation process and begin to setup printer after installation process have done, The "MFP Server Configuration" screen is displayed. if you want to configure the MFP Server , please click ""Next" directly. Or you can select "No, I will configure the MFP Server later" and click "Next" to complete the installation. The following steps are for MFP Server Configuration Enter the "User Name" and "Password" of the MFP Server you have selected to login the MFP Server. Note: You can define the location or other information of the MFP Server for easy to find the MFP by filling "MFP Server Description" MFP-101U Note: The MFP-101U MFP Server IP Address should be in the same network segment with the connected computer. [. . . ] Otherwise, please enter the IP Manually OvisLink Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC [. . . ]