User manual AIRLIVE IP-1000RV2

[. . . ] IP-1000R v2 Broadband Router User's Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive IP-1000R v2 User's Manual Table of Contents Table of Contents 1. [. . . ] If your ISP has provided you with a Connection ID, enter it in the Connection ID field. The MTU feature specifies the maximum packet size permitted for network transmission. Enter the value desired; for most DSL Broadband Internet connection users, 1460 is recommended. The Maximum Idle Time feature can control the Internet connection time (default time=0, always connect). Select Connect-on-demand for the Connect mode select feature to enable the IP-1000R v2 Broadband Router to connect to your ISP whenever an Internet connection is required. AirLive IP-1000R v2 User's Manual 20 4. Quick Setup 4. 2. 5 DNS The Domain Name System (DNS) manages the translation of a domain name into an IP address, and vice versa that of an IP address into a domain name. Your ISP should provide one or more DNS Server IP addresses, type those IP addresses in the Primary DNS address and Secondary DNS address fields, the IP-1000R v2 Broadband Router will utilize these simultaneously for quicker access to functioning DNS Servers. 21 AirLive IP-1000R v2 User's Manual 5. System The IP-1000R v2 Broadband Router supports advanced functions like System settings, WAN settings, LAN settings, NAT Settings, and Firewall settings. This page includes all of the basic configuration tools for the IP-1000R v2 Broadband Router. Under "System" located on the left-hand of the windows, select that you want to configure. Connecting to a Simple Network Time Protocol (SNTP) server allows the IP-1000R v2 Broadband Router to synchronize the system clock to the global Internet time through the SNTP Server. The synchronized clock in the IP-1000R v2 Broadband Router is used to record the system log and control client filtering. AirLive IP-1000R v2 User's Manual 22 5. System 5. 2 Administrator Settings Password Settings: Set an Administrator password if you wish to restrict management access to the IP-1000R v2 Broadband Router. Remote Management: To manage the IP-1000R v2 Broadband Router from a remote location (outside of the local network), you must specify the IP address of the remote computer. Leave the IP address as 0. 0. 0. 0, to allow any IP address to access to the IP-1000R v2 Broadband Router. 23 AirLive IP-1000R v2 User's Manual 5. System 5. 3 Firmware Upgrade Upgrading firmware for the IP-1000R v2 Broadband Router improves functionality and performance. Specify the path and name of the upgrade file then click the "APPLY" button. You will be prompted to confirm the upgrade. While upgrading the firmware, please wait after pressing the "APPLY" button, and follow the instructions on the screen; the System LED on the front panel will start blinking when the firmware has been upgraded successfully. AirLive IP-1000R v2 User's Manual 24 5. System 5. 4 Configuration Tools Use the "Backup Settings" tool to save the IP-1000R v2 Broadband Router current configuration to a file named "config. bin" on your PC. You can then use the "Restore Settings" tool to restore the saved configuration file back to the IP-1000R v2 Broadband Router that was set previously. Select "Restore to Factory Default" tool to force the IP-1000R v2 Broadband Router to reset and restore the original factory settings. Restore Factory Default To restore the factory default settings of the IP-1000R v2 Broadband Router, select the "Restore to Factory Default " option. Backup Settings Select the "Backup Settings" option to save the current IP-1000R v2 Broadband Router settings in a file called "config. bin, " or save to a filename of your choosing. [. . . ] PPPoE is a specification for connecting the users on an Ethernet to the Internet through a common broadband medium, such as single DSL line, wireless device or cable modem. Transparent Transparent mode works to transfer real IP address from WAN interface to the device that connects to DMZ port. So the DMZ device can also get real IP address and offer the service with Internet users. 43 AirLive IP-1000R v2 User's Manual 12. A network algorithm used by Routers to enables several PCs to share single IP address provided by the ISP. [. . . ]