User manual AIRLIVE CAMPRO HD

[. . . ] CamPro HD 64CH IP HD Camera Management Software User's Manual 1 Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. i AirLive CamPro HD User's Manual Copyright and Disclaimer FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] User could modify it for your own schedule Clone Setting (copy setting from a camera): AirLive CamPro HD User's Manual 60 2. Select a camera and click "Copy" button to copy selected all weekday schedule setting. Click "Paste" button and select "Paste" will update selected camera all weekday's schedule setting. Click "Paste" button and select "Paste on Monday to Friday" will update selected camera's Monday to Friday schedule setting as same as copied Monday to Friday setting. Click "Paste" button and select "Paste on Saturday to Sunday" will update selected camera's Saturday and Sunday setting as same as copied Saturday and Sunday setting. If select a weekday , and Click "Paste" button , then select "Paste to all camera on Selected Weekday" will update all camera's selected weekday setting as same as copied camera weekday. Click "Apply all" button to update all camera's setting as same as copied camera. Select a weekday of one camera and click "Copy" button to copy selected weekday schedule setting. Select a camera and click "Paste" button, select "Paste" on pop-up menu will update same weekday's setting of selected camera. Select a weekday of camera, click "Paste" button and select "Paste" on pop-up menu will update selected weekday's setting from copied data. Click "Paste" button and select "Paste on Monday to Friday" will update selected camera's Monday to Friday schedule setting as same as copied Weekday setting. Click "Paste" button and select "Paste on Saturday to Sunday" will update selected camera's Saturday and Sunday setting as same as copied Weekday setting. If select a weekday , and Click "Paste" button , then select "Paste to all camera on Selected Weekday" will update all camera's selected weekday setting as same as copied camera weekday. Click "Apply all" button to update all camera's all weekday settings as same as copied Weekday. 61 AirLive CamPro HD User's Manual 2. Main-console 2. 6. 4 Select camera of special day mode: When you choose Special Day mode" or click "Special Day" tab of camera list tree, the list tree will display all installed cameras of system. The schedule configuration of this camera will display at left of dialog. System defaults the schedule from 00:00 to 23:59 round the clock recording setting. If copy setting from a date, click "Paste" button will update all cameras of selected target date by copied setting. If copy setting from a camera of some special date , click "Paste" button with selected a date to update the camera schedule setting. Copy a camera schedule setting and paste to another camera by click "Paste" button with selected a camera. 2. 6. 5 Add or remove special day: If you want to add a new special day into system, choose a day from date-time picker control, then click the "Add" button. If you want to remove a special day from system, click the special day on the tree control at right of dialog, then click the "Delete" button. AirLive CamPro HD User's Manual 62 2. Main-console 2. 6. 6 Add schedule time slice: You can define a time slice as below: 1. [. . . ] Remote Service 4. 4 Select preview live channels: First time you login the remote sever, IE will popup a selection window to confirm connection channels, After confirm connection channel list, system will keep the setting value, and auto connect these channels next time. If you need to change the connection list, please re-select the list from the setting dialog. Get the setting dialog from click "System Setup" button, and select "Select View Channel" from popup menu. Connect to more channels needs more computer resource; please make sure the PC has enough resource to handle remote service. 117 AirLive CamPro HD User's Manual 4. Remote Service 4. 5 Operation with main page / Playback: Remote main page operation step is similar to local, please reference chapter 1. Main-console Remote Playback page operation step is similar to local, please reference chapter 2. [. . . ]