User manual AIRLIVE ARM-204

[. . . ] ARM-204 Wired ADSL 2/2+ Modem Router User's Guide AirLive ARM-204 ADSL2/2+ Router 1 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a residential environment. AirLive ARM-204 can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If AirLive ARM-204 does cause harmful interference to radio or television reception, which is found by turning the equipment ON and OFF, the user is encouraged to try to reduce the interference by one or more of the following measures: Increase the separation between the equipment or device Consult a dealer or an experienced technician for assistance CE Declaration of Conformity This is to certify that this device complies the essential protection requirements of the European Council Directive 89/336/EEC, Article 4a. [. . . ] Dynamic Route Dynamic routing allows routing tables in routers to change as the possible routes change. This router supports RIP1, RIP2-B and RIP2-M protocols for dynamic routing. After the RIP protocol is selected, please choose the RIP direction from "None", "Both", "IN Only" or "OUT Only". Parameter Multicast Description Specify the method of transmitting data simultaneously to many receivers. Please select "IGMP v1" or "IGMP v2" as the multicast protocol or select "Disabled" to disable the function. 5. 2. 2. LAN 34 Router Local IP Parameter IP Address Description Enter the IP Address of the ADSL router for the local user to access the router's web page. By default, the IP Address is 192. 168. 2. 1. Parameter IP Subnet Mask Description Enter the Subnet Mask of the ADSL router. By default, the Subnet Mask is 255. 255. 255. 0. Dynamic Route Dynamic routing allows routing tables in routers to change as the possible routes change. This router supports RIP1, RIP2-B and RIP2-M protocols for dynamic routing. After the RIP protocol is selected, please choose the RIP direction from "None", "Both", "IN 35 Only" or "OUT Only". Multicast Specify the method of transmitting data simultaneously to many receivers. Please select "IGMP v1" or "IGMP v2" as the multicast protocol or select "Disabled" to disable the function. DHCP Parameter DHCP Description You can enable or disable the DHCP server. By enabling the DHCP server the router will automatically give your LAN clients an IP address. If the DHCP is not enabled then you'll have to manually set your LAN client's IP addresses. Starting IP Address If the DHCP Server is enabled, please set the "Starting IP Address" which will be the first IP Address assigned to the LAN client. IP Pool Count You can select a particular IP address range for your DHCP server to issue IP addresses to your LAN Clients. Parameter Lease Time Description In the Lease Time setting you can specify the time period that the DHCP Server lends an IP address to your LAN clients. The DHCP will change your LAN client's IP address when this time threshold period is terminated. DNS Relay A Domain Name System (DNS) server is like an index of IP addresses and Web addresses. If you type a Web address into your browser, such as "www. router. com", a 36 DNS server will find that name in its index and the matching IP address. Please select "Use Auto Discovered DNS Server Only" to auto set the DNS Server. If there is a DNS server that you would rather to use, please select "Use Discovered DNS Server Only" and you need to specify the IP address of that DNS server. Primary DNS Server Enter the ISP's DNS Server IP Address; or you can specify your own preferred DNS Server IP Address. [. . . ] PPPoE (RFC 2516) This document describes how to build PPP sessions and encapsulate PPP packets over Ethernet. PPP over Ethernet (PPPoE) provides the ability to connect a network of hosts over a simple bridging access device to a remote Access Concentrator. Protocol A protocol is a set of rules for interaction agreed upon between multiple parties so that when they interface with each other based on such a protocol, the interpretation of their behavior is well defined and can be made objectively, without confusion or misunderstanding. PVC Permanent Virtual Circuit, connection-oriented permanent leased line circuit between end-stations on a network over a separate ATM circuit. [. . . ]