User manual AIRLIVE ARM-201

[. . . ] ARM-201 Wired ADSL2/2+ Ethernet/USB Modem User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Wired ADSL2/2+ Ethernet/USB Modem AirLive ARM-201 is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Limits and methods of measurement of radio disturbance characteristics of information technology equipment Disturbances in supply systems caused by household appliances and similar electrical equipment "Harmonics" Disturbances in supply systems caused by household appliances and similar electrical equipment "Voltage fluctuations" Information Technology equipment-Immunity characteristics-Limits And methods of measurement 55022:1998/A1 :2000/A2:2003 61000-3-2:2000 EN EN 61000-3-3:1995/ A1:2001 55024:1998/A1 :2001/A2:2003 EN EN 60950-1:2001/A11 Safety for information technology equipment including electrical :2004 business equipment marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2008/1/1 AirLive ARM-201 CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive ARM-201 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive ARM-201 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] Default Router: Select whether this PVC will be default router for internet data. 50 AirLive ARM-201 User's Manual [Dynamic Route] RIP (Routing Information Protocol): Select this option to specify the RIP version, including RIP1, RIP2-B and RIP2-M. RIP2-B & RIP2-M are both sent in RIP-2 format, the difference is that RIP2-M using Multicast and RIP2-B using Broadcast format. Both means the ADSL Router will periodically send routing information and accept routing information then incorporate into routing table. IN only means the ADSL router will only accept but will not send RIP packet. OUT only means the ADSL router will only sent but will not accept RIP packet. [Multicast] IGMP (Internet Group Multicast Protocol): It is a session-layer protocol used to establish membership in a multicast group. Note: Every time you change one setting, you must click SAVE button once, and then go to next setting's change. 4. 3. 2 LAN There are the IP settings of the LAN Interface for the device. The LAN IP address is provided to your internal network and cannot be seen on the Internet. [Router Local IP] IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for example, 192. 168. 2. 1 (default setting). IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing sub netting, use the subnet mask computed by the ADSL router. Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. The only difference is the interface. 51 AirLive ARM-201 User's Manual Direction: Select the RIP direction from None, Both, In Only and Out Only. Multicast: IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The only difference is the interface. [DHCP Server] The DHCP Server gives out IP addresses when a device is booting up and request an IP to be logged on to the network. That device must be set as a DHCP client to obtain the IP address automatically. The DHCP address pool contains the range of the IP address that will automatically be assigned to the client on the network. Starting IP address: The starting IP address for the DHCP server's IP assignment. Lease Time: The length of time for the IP lease. [DHCP Relay] A DHCP relay is a computer that forwards DHCP data between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enable, the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To have this function working properly, please run on router mode only, disable the DHCP server on the LAN port, and make sure the routing table has the correct routing entry. DHCP Server IP for relay agent: The DHCP server IP Address runs on WAN side. [DNS Relay] The DNS Configuration allows the user to set the configuration of DNS. DNS Rely Selection: If user wants to disable this feature, he just needs to set both Primary & Secondary DNS to 0. 0. 0. 0. [. . . ] If you have configured a secured client IP address, your computer's IP address must match it. 4 For WAN access, you must configure remote management to allow server access from the WAN (or all). 5 Your computer's and the router's IP addresses must be on the same subnet for LAN access. 6 7 If you changed the router's LAN IP address, then enter the new one as the URL. [. . . ]