User manual AIRIS MW143
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AIRIS MW143. We hope that this AIRIS MW143 user guide will be useful to you.
Manual abstract: user guide AIRIS MW143
Detailed instructions for use are in the User's Guide.
[. . . ] Directions Ltd
Precautions and Notices
2
1
Precautions and Notices
· For your own safety, do not operate the controls of the product while driving. It is not for precise measurement of direction, distance, location or topography. It is the user's responsibility to follow the traffic signs and local regulations along the roads. · When you get out of the car, do not leave your device on the dashboard subjected to direct sunlight. [. . . ] Signal reception can be affected by situations such as bad weather or dense overhead obstacles (e. g. · Other wireless devices in the vehicle might interfere with the reception of satellite signals and cause the reception to be unstable. Be sure that you place the device in an appropriate place, so as not to obstruct the driver's view, or deployment of airbags.
2
Getting Started
This chapter tells you step by step how to perform the initial startup and introduces the components of your device.
© 2006 . . . Directions Ltd
3
Airis MW143
2. 1
Performing the Initial Start Up
1. CAUTION: Always leave the ON/OFF
switch in the ON position for normal operation.
2. Your device turns on and displays the "Change Language" screen. You can tap the left/right arrow to select a language if your region of purchase is a country with multiple languages. Tap to continue.
NOTE: If multiple languages are available, you can change the language later on by tapping Setting -> Change Language.
3. tap the appropriate arrow button to select the time zone, date, and time. Directions Ltd
Getting Started
4
NOTE: You can change the time zone, date and time later by tapping Setting -> Date&Time.
4. You can now use your new device.
2. 2
Connecting and Charging the Battery
Fully charge the battery before using your device for the first time. Tap a button to start an application or open another menu screen.
Button
Description Starts the Pocket Navigator 6 navigation software
Allows you to customize system settings
© 2006 . . . Directions Ltd
Basic Skills
12
4. 2
Using the Stylus
The stylus is your input device. You can use the stylus for the following actions:
· Tap
Touch the screen once with the stylus to open items or select options. · Drag Hold the stylus on the screen and drag up/down/left/right or across the screen. · Tap and hold Tap and hold the stylus until an action is complete, or a result or menu is shown.
4. 3
Using a SD/MMC Card
Your device has a SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. Keep a SD or MMC card in a well-protected
box to avoid dust and humidity when you are not using it.
To use a SD/MMC card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device.
© 2006 . . . Directions Ltd
13
Airis MW143
To remove a card, first make sure that no application is accessing the card, and then slightly push the top edge of the card to release it and pull it out of the slot.
5
System Settings
Your device has default system settings. Once you change the settings, your new settings will remain until you change them again.
5. 1
Using System Settings
To open the Settings screen, tap the Setting button on the Home screen.
The Settings screen contains seven buttons as shown below. The following sections describe these buttons and their functions.
© 2006 . . . Tap the Setting button on the Home screen to open the Settings screen. Tap the left or right arrow to darken or brighten the screen.
© 2006 . . . [. . . ] When the target moves to another position, tap and hold the centre of the new target. When completed, tap button to return to the Settings screen.
5. 5
Power
To check the remaining power level of your battery and/or set up the power saving feature: 1. NOTE: If the level of power is too low, be sure to charge the battery with the USB lead or the car
charger.
You can set a timer to automatically turn off your device when it is idle for a set period of time. The options include Never, 30 minutes, 20 minutes, and 10 minutes.
4. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AIRIS MW143
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AIRIS MW143 will begin.