User manual AIRIS M137OK

[. . . ] SLEEP button: this key is used to activate the screen off timer function and set it from 10 to 240 minutes. The programming time will appear in the lower right-hand corner of the screen. It will then disappear and be shown again when one minute remains before it is turned off. [. . . ] REVEAL Button: press this button to show the current channel number, system data, etc. VIEW Button: press this button to return to the programme being watched previously 9. Source Select Button: use this button to select the external video sources that are connected to the screen. Every time the button is pressed, changes it to the new input source, in the following order: PC DVI TV AV S-VIDEO YcbCr SCART HDTV __________________________________________________| 10. MONO/STEREO Button: when a channel is being received in stereo, this button can be used to select from among the different audio modes (stereo, mono, Dual A, DualB, Nicam, etc. ) available during transmission. PIP Button: press this button to superpose a window with another image source (not another TV channel) on the main image. When selecting the VGA or DVI input, this function will only be available if the VGA signal is set to 1024x768/60 Hz and the video source is set to full screen. SOUND Button: press this button to select the different sound effects: Personal/Cinema/Music and Dialogue. 14. Image Button: press this button to select the different image modes from among Personal, Bright, Medium and Standard. Channel SWAP: when tuning in the channels, these are stored sequentially as they are found by the tuner. This option enables you to exchange the positions in which they were stored, so that they can be set according to your preferences. Programme label: this option enables you to name the programmes so that you can find the channel being tuned in at any time. When doing this, the programme number will be shown followed by the name input (TVE1, ANT3, TELE5, etc. . . ). Use the direction keys to select the desired numbers or letters and then press the MENU key to select each one. When this operation has been completed, highlight the END, FINISH or FIN options to store the programme label. Select the option Channel Search and press the RIGHT enter the channel tuning sub-menu: FIGURE 2 direction key to The menu has the following options: Search Mode: Tune in or Surf. Automatic Search: select this option for the screen to start searching for channels throughout all the frequency bands. The channels found will be stored in the order in which they were found (RECOMMENDED OPTION). [. . . ] The channels found will be stored in the order in which they were found (RECOMMENDED OPTION). Manual Search: select this option to tune in to each separate channel manually. Fine Tune: this option enables you to set the tuning of each separate channel to obtain the best possible quality image and sound. [. . . ]