User manual AIRIS M137

[. . . ] Volume Control Keys (+/-): press the + key to raise the volume and the ­ key to lower it. Channel keys (+/-): press the + key to go to the next tuned-in channel. [. . . ] Subpage Button (only NTSC): press this button to select CC1, CC2, TEXT1, TEXT2, XDS, CC3, CC4, TEXT3 and TEXT4 de los closed captions. HOLD Button: press this button to digitally freeze the image you are viewing on the screen at that time. INDEX Button: pres this button to show the information on the channel you are viewing at that time on the screen. Signal --------------------------------Current time -------------------------Current channel name --------------(defined in the channels edition) TV channel & sound system ------TV 13:15 SZTV1 CH 9 I 20. TELETEXT Button: press this button to activate the teletext screen, combining the teletex screen with the TV image or to deactivate the teletext. Direction Keys: use these keys to move around in the different configuration menus offered by the screen. HOLD Button: some pages of the teletext contain several subpages that rotate automatically. INDEX Button: press this button to go to the index page of the Teletext, which is usually page 100. BLUE, RED, YELLOW and GREEN Buttons: by pressing these buttons you can go straight to the pages that correspond to the different colours. These pages are defined by the teletext of each channel. Channel-Tuning To start tuning in the TV channels, check that the aerial is properly connected and that you have selected the channel setting menu on the screen. FIGURE 1 The menu has the following options: Colour system: the options available are PAL, AUTO and NTSC. Channel search: by selecting this option you can enter the channel tuning submenu. [. . . ] The screen will start searching for the available channels and the following progress bar will be shown: FIGURE 3 This process takes a few minutes. If this is not the case and the screen shows the TV image, press the MENU key until figure 1 appears. [. . . ]