User manual AGFAPHOTO DC-302

[. . . ] 1. 2 Before using the DC-302 Try to take some pictures before you perform the formal recording. Before taking pictures with this camera of any important occasion (such as a 3 wedding ceremony or on vacation), do test the camera beforehand to ensure that it functions well. Any additional loss caused by the malfunction of this product (such as costs of photography or any loss of benefit generated by the photography) is not the responsibility of our company and no compensation will be given for it. 1. 3 Copyright information Unless agreed by the right owner, all the pictures taken with this digital camera cannot be used in violation of copyright law. [. . . ] 3. 5 Using your DC-302 3. 5. 1 Take pictures You just press the shutter button down and with a distinct beeping sound, a snapshot is finished. At the same time, the number on the monitor screen will decrease by one. 3. 5. 2 Self-timer Press the menu button into the menu, change to the self-timer mode, after that press the menu button to confirm. Press the shutter button, the self-timer LED will blink for 10 seconds and then capture a picture. 17 3. 5. 3 Take video Press the menu button into the menu and change to the video mode. 3. 5. 4 Use the flash Press the flash button into the FLASH AUTO or ON mode, the camera will charge the flash; the monitor screen will be close and the operation LED will blink. When LED stops blinking and the monitor screen turns on, the charging is done. The FLASH ON function will always fire the flash, the FLASH AUTO function will fire automatically as needed. 3. 5. 5 Use the digital zoom In the REC mode you can use the digital zoom. Before taking videos press the UP button to zoom in, press the DOWN button to zoom out. 18 3. 5. 6 Playback mode Press the playback button to come to the playback mode. In the one picture mode, press the UP or DOWN button and zoom in or zoom out of the picture. If a video is selected in the nine picture mode, press the DISPLAY button and playback of the video starts. 3. 5. 7 Download Turn the camera on to the preview mode and connect the camera to the computer via a USB cable. The LCD screen will display MSDC and the camera will be recognized as a removable FLASH DISK. 3. 5. 8 How to use the PC camera function Install the camera driver from the CD. Connect the camera to the computer with a USB cable, run the program Amcap under the folder <Sunplus 19 Ca533> in the program, select the device as Sunplus SPCA533. After that select Options as Preview. 20 If you want to change the imaging size, select the Video Capture Pin then change the output Size. 4. How to install and use the Accompanying application Insert the accompanying CD into the CD-ROM drive and the install dialogue box will appear automatically. 21 4. 1 Driver Installation Click on Camera Driver button and follow the next steps. 22 23 Set the camera to recording mode and connect it to the computer. The 24 computer will find a new device and automatically install the device driver. If the computer prompt needs a file path, search it with the path C:\WINDOWS\SETUP533. When the installation is finished, go to Control Panel \System \Hardware \Device Manager and check the Imaging Device \Icatch(IV) Still Camera Device and Icatch(IV) Video Camera Device are OK. 4. 2 Software Installation Click on ArcSoft VideoImpression to install the Application software (ArcSoft VideoImpression). 25 Click on ArcSoft PhotoImpression to install the Application software (ArcSoft PhotoImpression). Click on Adobe® Acrobat® ReaderTM to install the software (Adobe® Acrobat® ReaderTM). 26 Click on User Guide (in PDF Format) to view the user guide. Click on "Exit" icon to close this screen and exit the setup program 27 5. DC-302 specifications *3 in 1 mode: - Digital still camera mode: image capture - PC camera mode: video capturing/ conferencing - Camcorder mode: video clips Sensor: CMOS sensor, 3. 1 megapixel Lens: F=3. 0; f=8. 35 Focus range: 2. 0m to infinity Shutter speed: 1/20-1/6000 s Image resolution: Super (2560 x 1920), high (2048 x 1536), medium (1600 x 1200), low (1280 x 1024) for image capture VGA (640 x 480)/ QVGA (320 x 240) for PC camera mode QVGA (320 x 240)/ QCIF (192 x 144) for Video recording mode Memory: Internal memory 16 MB image memory, external SD / MMC card compatible (1 GB) ­ not in the scope of delivery Self-timer: 10 secs Zoom: 8x digital zoom Colour LCD screen: 1. 5 inch display 28 OSD language: English, French, German, Spanish, Italian, Dutch, Portuguese, Turkish Flash mode: On/Auto/Off Battery: 3x AAA (alkaline/ 1. 5V) batteries Interface: USB 1. 1 PC Demand Specification CPU: Pentium III 800MHz and upper OS: Windows 2000/ME/XP/ Vista Memory: 256MB and upper memory Disk space: At least 250MB space free CD-ROM drive 6. Battery is not properly installed: Remove and reinstall the batteries. [. . . ] Connect the equipment to an outlet on a circuit different from that to Consult the dealer or an experienced radio/TV technician for help. which the receiver is connected. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. When shielded interface cables have been provided with the product or when specified additional components or accessories have elsewhere been designated to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. 37 8. Customer care More information to the complete product range can be found under: www. plawa. com Service & Repair Hotline (Europe): 00800 75292100 (from landline only) Service & Support Hotline (Germany): 0900 1000 156 (0. 49 Cent/ min. [. . . ]