User manual AEG IKE64473IB

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. visit our website to: Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] The heat setting of the cooking zone selected last is always prioritised. The remaining power will be divided between the previously activated cooking zones in reverse order of selection. The heat setting display of the reduced zones changes between the initially selected heat setting and the reduced heat setting. Wait until the display stops flashing or reduce the heat setting of the cooking zone selected last. The cooking zones will continue operating with the reduced heat setting. Power management with Power limitation When you set the Power limitation function to 6000 W or less, the power of the hob is divided among all cooking zones. Refer to the illustration for possible combinations in which power can be distributed among the cooking zones. When you set the Power limitation function to more than 6000 W, the power of the hob is divided between its left and right side. It is an advanced automatic function which connects the hob to a special hood. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. Operating the function automatically To operate the function automatically set the automatic mode to H1 ­ H6. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan. Fan speed Fan speed Fan speed Fan speed Fan speed Fan speed Fan speed Fan speed 1) The hob detects the boiling process and acti- vates fan speed in accordance with automatic mode. 2) The hob detects the frying process and acti- vates fan speed in accordance with automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature. To operate the hood directly on the hood panel deactivate the automatic mode of the function. When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds. Operating the fan speed manually You can also operate the function manually. This deactivates automatic operation of the function and allows you to change the fan speed manually. when you reach An intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To activate automatic operation of the function, deactivate the hob and activate it again. [. . . ] Activate the hob again and set the heat setting in less than 10 seconds. You put something on one or more Remove the object from the sensor You put something on the sensor field . The zone is not hot because it oper- If the zone operated sufficiently long to Ated only for a short time or the sen- be hot, speak to an Authorised Service You covered the control panel. You use a very tall pot which blocks Use a smaller pot, change the cooking Let the zone become sufficiently cool. [. . . ]