User manual AEG FSK93700P

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. visit our website for: Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. From 1 to 24 hours OFF (default value) The option list shows only the options that are applicable to the selected programme. If you select options that are not compatible, the appliance automatically deactivates one or more of them. Activating options can affect the water and energy consumption as well as the programme duration. Ensures better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. shows the appliance settings Display informs which options are deactivated. When the programme is complete or cancelled, the options are set to the default values. To change the value from Display shows the number of hours Press repeatedly until the display shows the selected programme. XtraDry is a permanent option for all programmes other than ECO 50°. Every time ECO 50° is activated, XtraDry is off and needs to be chosen manually. When you activate the appliance for the first time, you need to set the language. Make sure that the current level of The water softener agrees with the Not, adjust the level of the water Do put dishes in the baskets. The washing results are the same as with the normal programme duration. Programme, the display shows two After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. When the rinse aid dispenser needs refilling, the display shows the related message. If you use multi-tablets and the drying performance is satisfactory, the message about refilling the dispenser can be disabled by setting the rinse aid level to 0. We recommend to always use rinse aid for better drying performance, also in combination with multitablets containing rinsing agent. Fill the salt container if the display Fill the rinse aid dispenser if the Set and start a programme suitable for the type of load and the degree of soil. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If the programme is applicable to the TimeSaver option, the display shows two Close the appliance door to start the How to start the MyFavourite programme Seconds until the display shows the Close the appliance door to start the How to delay the start of a programme It is not possible to set the delay start of the MyFavourite programme. [. . . ] The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. [. . . ]