User manual AEG FSK52637P

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. visit our website for: Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] The appliance door opens automatically during the drying phase and remains ajar. You can set the automatic selection of the most recently used programme and options. The latest programme that was completed before the appliance deactivation is saved. Do not try to close the appliance door within 2 minutes after automatic opening. If children have access to the appliance, we advise to deactivate AirDry. When AirDry opens the door, Beam-on-Floor might not be completely visible. The buttons on the control panel make a click sound when you press them. Next button Use Previous and Next to switch between the basic settings and to change their value. Use OK to enter the selected setting and to confirm changing its value. How to enter setting mode You can enter setting mode before starting a programme. The lights related to the Previous, OK Make sure the appliance is in setting mode. Use Previous or Next to select the Bar of the ECOMETER dedicated to the desired setting. Make sure that the current level of the water softener agrees with the hardness of the water supply. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. If the latest programme selection is enabled, the saved options are activated automatically along with the programme. It is not possible to activate or deactivate options while a programme is running. Activating options often increases the water and energy consumption as well as the programme duration. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease. During the countdown, it is not possible to change the delay time and the programme selection. 6 How to cancel the delay start while the countdown operates The appliance returns to the programme selection. [. . . ] Once you have checked the appliance, deactivate and activate the appliance. For alarm codes not described in the table, contact an Authorised Service Centre. If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. Before checking the PNC, make sure the appliance is in the programme selection. [. . . ]